Saltar al contenido principal

IPv6

Y tho

As of mid 2024:

CGNAT is becoming more prevalant, making it harder to make P2P ports available inbound and get good peering.

Docker support for IPv6 is better.

Ethereum clients are starting to add v6 support, which can benefit from testing.

How then

Check you have v6

You can test, from a PC on your LAN, that whatismyip shows both a public v6 and v4 address. If so, your router is set correctly. This will likely be the case "out of the box" on any ISP that uses CGNAT, and on several that don't, like Comcast in the US.

On your node, ip address show should show you both a v4 inet and public v6 inet6 address on the interface. If all you see is an fe80:: address for inet6, you don't have a routable v6 address configured, and you'll want to fix that, first.

Configure Docker

You'll want to be on the latest version of docker-ce, at least 27.0.1.

If you previously had IPv6-specific settings in /etc/docker/daemon.json, you can remove them now.

Configure Eth Docker

nano .env and set IPV6=true, which will tell Compose to enable v6 for the networks it creates.

Safu?

Maybe. I still have to test ufw integration.
On your LAN firewall, if this is in a LAN, you'd need rules to allow the P2P ports incoming to the v6 address of your node.

Which clients?

CL

  • Lighthouse
  • Lodestar
  • Nimbus
  • Teku: Unsure, advertisement not tested
  • Prysm: Maybe, --p2p-local-ip ::, but not dual-stack
  • Grandine: Unsure
  • Lambda: Unsure

EL

  • Besu: not fully tested
  • Geth: not fully tested
  • Erigon: not fully tested
  • Nethermind: Possibly no advertisement, no explicit discv5 option
  • Reth: No IPv6 connectivity on main as of mid Nov 2023
  • Nimbus: Unsure