Zum Hauptinhalt springen

Changelog

Updating Eth Docker

To update the components of Eth Docker, run from within its directory (cd ~/eth-docker by default):

  • ./ethd update. This fetches new client version(s), a new Eth Docker, and updates .env, keeping your modifications. If you want to reset the source or binary build targets in .env, run ./ethd update --refresh-targets instead.
  • ./ethd up - use the new client version(s)

On 1/27/2022, Eth Docker's repository name changed. Everything should work as it did. If you do wish to manually update your local reference, run git remote set-url origin https://github.com/eth-educators/eth-docker.git

v2.13.0.0 2024-10-16

This is a recommended release

Breaking changes

  • Require Prysm v5.1.1 or later

Changes

  • Add support for commit boost
  • A fresh Reth sync keeps all receipts, for compatibility with sundry protocols such as SSV, RocketPool, NodeSet, StakeWise
  • Improved IPv4/v6 dual stack support
  • IPv6 is enabled on hosts that have IPv6 connectivity
  • Add Titan relay to Lido CM config dialog. Thanks @vgorkavenko!

Bug Fixes

  • Fixes to Lido CSM support. Thanks @cnupy!
  • Undo the Prysm VC REST use that "snuck in" with CSM. Prysm VC uses RPC again on port 4000, until the Prysm team promote the REST VC from experimental to released

v2.12.3.0 2024-09-20

This is a recommended release

Changes

  • Support Lido CSM module. Thanks @dgusakov, @vgorkavenko and @cnupy!
  • Add non-censoring Titan relay to mainnet default
  • Remove Eden relay from defaults
  • Do not switch Erigon repo to erigontech/erigon, yet, until images there contain linux/amd64

Bug Fixes

  • grafana.yml and grafana-cloud.yml work with Docker 27.3.0 and later. Thanks u/ChewsMacRibs!
  • Fix incorrect method name during ./ethd update. Thanks @kajeagentspi!

v2.12.2.0 2024-09-14

This is an optional release

Changes

  • Reth full sync now supports RocketPool, SSV and StakeWise by including their contracts for eth_getLogs / receipts. If you have an existing synced Reth, you'd need to make the change to reth.toml manually.
  • Erigon now defaults to the new erigontech/erigon repo and latest tag
  • Updated SSV dashboards
  • Add ./ethd keys count command. Thanks @Hydepwns!
  • Persist Web3signer keys registered with Prysm
  • Use Go 1.23 for source builds
  • Support IPv6 for traefik
  • Besu sync mode and RPC API can be configured with EL_EXTRAS
  • Do not override Nethermind's --Pruning.CacheMb, as it was causing performance issues
  • Offer Prysm on ARM64
  • Offer Erigon on ARM64
  • Clarify the OS version nag
  • Source build for Teku and Besu uses Noble Numbat
  • Fresh sync of Besu, Geth or Nethermind prefers a Docker volume without eth1 in the name

Bug fixes

  • Only use sudo for dkg_output directory permission changes when needed. Thanks @jshufro!

v2.12.1.0 2024-08-10

This is an optional release

Changes

  • Support Erigon v3, including Caplin. To use Caplin, do not use an external CL
  • Use early attestations with teku-vc-only.yml. Thanks @b0a7!

v2.12.0.0 2024-08-08

*This is a mandatory release for users of Lodestar 1.21.0 and above

Breaking changes

  • Require Lodestar 1.21.0 or later

v2.11.2.0 2024-08-08

This is an optional release

Changes

  • Support IPv6 with Teku 24.8.0
  • Users can freely set the Nethermind RPC namespaces through EL_EXTRAS

v2.11.1.0 2024-08-01

This is a mandatory release for users of Lighthouse Siren

Changes

  • Support Lighthouse Siren 2.0
  • Re-enable Nimbus in ./ethd config when using SSV

Bug fixes

  • Support the new Lighthouse dashboards

v2.11.0.1 2024-07-28

This is a recommended release for SSV node operators, with bug fixes

Changes

  • Switch Nimbus source build to alpine, from debian
  • Support RISC-V architecture in ./ethd config. Thanks to @lazyprogrammerio and @haurog!

Bug fixes

  • Remove Nimbus from SSV config query, see Nimbus PR. Thanks to @jwhelan72, celticwarrior on Ethstaker Discord!
  • Allow --debug on ./ethd keys import
  • Only grep ~/.profile if it exists
  • Recognize arm64 (Mac M1/2/3) during ./ethd config

v2.11.0.0 2024-07-13

This is an optional release with breaking changes

Breaking changes

  • Require Lodestar 1.20.0 or later when using lodestar.yml
  • Require Besu 24.7.0 or later when using ./ethd prune-besu

Changes

  • Replace Grandine deprecated --builder-api-url with --builder-url
  • Change Grandine default tag to stable from latest
  • Replace Besu deprecated storage x-trie-log prune with storage trie-log prune
  • Reenable Nethermind --Pruning.CacheMb 4096 on systems with 32 GiB of RAM or more
  • lodestar.yml uses SSZ wire format and no longer specifies the REST namespace. Thanks @nflaig!

v2.10.1.0 2024-07-10

This is an optional release with new features

New features

  • Add ./ethd prune-reth command. This should be run once only, when upgrading from Reth 1.0.0
    • While Reth 1.0.0 is running and fully synced, ./ethd update. This brings in Reth 1.0.1 but does not activate it yet.
    • ./ethd prune-reth. This prunes the Reth database, then restarts Reth. All other changed containers are also restarted.

Bug fixes

  • ./ethd keys works with Prysm again
  • Choosing "No" for SSV DKG during SSV configuration no longer quits ethd

v2.10.0.0 2024-06-23

This is an optional release with breaking changes

Breaking changes

  • Require Prysm 5.0.4 or later; enable Prysm QUIC port
  • Remove explicit Besu trie log limit, as it is default from 24.6.0 on

New features

  • Add a network label to the metrics

Bug fixes

  • Prysm can fetch genesis for Sepolia and Holešky
  • Nimbus EL builds and starts again
  • Resolve FromAsCasing warnings by Docker

v2.9.2.0 2024-06-11

This is an optional release with new features

New features

  • Support Nethermind 1.27
  • Switch Lighthouse latest-modern to latest, to support 5.2.0
  • Switch Erigon stable to v2.60.1. Please track Erigon versions manually
  • Migrate existing Prysm and Lighthouse setups to new volume names matching the cl-only.yml ones
  • Enable separate static dir for Reth via ANCIENT_DIR
  • Source-build Besu with JDK 21
  • Grandine uses pruned storage when not configured as an archive node

Bug fixes

  • DKG chown uses the owning user's group and only runs when required
  • Fix ./ethd sign-exit all with web3signer and Prysm or Teku
  • Fix Lodestar source build
  • SSV config works on macOS

v2.9.1.0 2024-05-05

This is an optional release with new features

New features

  • Support the Grandine consensus layer client
  • Migrate to Loki 3. Caution that if you didn't update after 2024-04-09 and before 2024-05-01, this may require you to stop Loki with ./ethd stop Loki, remove its volume with docker volume rm eth-docker_loki-data (adjust if the directory is not named eth-docker), and start again with ./ethd up.

Bug fixes

  • Reth DB conversion check works when there are two Reth on the machine
  • ./ethd install doesn't throw an error if Docker is already installed and pkg-config is not

v2.9.0.0 2024-04-25

This is an optional release with new features

Breaking changes

  • Requires Nethermind v1.26.0

New features

  • ./ethd prune-nethermind will migrate the Nethermind DB to HalfPath on nodes with 32 GiB of RAM or more
  • Add discv5 to Reth

Changes

  • Teku default heap to 6g
  • Lodestar default max peers to 100
  • Use Geth 1.14.0 defaults
  • Remove ./ethd prune-geth

Bug fixes

  • Do not default Besu to highspec on less than 64 GiB RAM, to avoid OOM errors
  • Do not downgrade the .env version
  • Fix Loki and prepare for Loki 3
  • Check for snap docker earlier

v2.8.0.0 2024-03-07

This is an optional release with new features

Breaking changes

  • Requires Besu 24.3.0

New features

  • Supports ./ethd prune-besu for long-running Besu DBs, to one-off prune trie logs

v2.7.1.0 2024-03-06

This is an optional release with new features and bug fixes

New features

  • Supports Reth beta and prompts for resync if coming from Reth alpha
  • Update cadvisor to 0.49.1
  • Update ethereum-metrics-exporter to 0.23.0

Bug fixes

  • Fix HOST_IP in allin1.yml files
  • Lodestar dashboard shows more metrics
  • Fix ./ethd config not building
  • Besu high spec more reliably activates with 64 GiB RAM
  • pull_policy: never to avoid extraneous builds

v2.7.0.0 2024-02-24

This is an optional release with new features and bug fixes

Breaking changes

  • Breaks if ext-network.yml was changed. In this case please mv ext-network.yml ~ it out to your home directory, try ./ethd update again, and then nano ext-network.yml and re-apply the changes that were made, likely just the network name as name: rocketpool_net for reverse hybrid.
  • Drops support for Docker Compose V1
  • Drops support for automatically converting pre-merge (before September 2022) configurations
  • Requires Nethermind v1.25.4 or later

New features

  • Changed Lighthouse default max peers to 100, to match their 5.0.0 release
  • Lodestar flags updated to use the current convention. Thankls @nflaig!

Bug fixes

  • Works more consistently on macOS. Thanks to @alindsilva and @toraonion for raising the issue and testing!
  • Fixed prometheus-traefik.yml
  • Fixed the jwt secret that ethd config queries for not being saved. Thanks @victorelec14!

v2.6.1.0 2024-02-10

This is an optional release with new features and bug fixes

New features

  • ./ethd sign-exit all will sign a voluntary exit message for all loaded validators
  • ./ethd update --help will print help specific to the update command
  • Added a Graffiti length check to ./ethd config
  • Changed the CloudFlare DDNS container, as the old one is no longer supported upstream
  • Source compile for Geth, Prysm, Erigon and mev-boost uses Go 1.22

Bug fixes

  • Updated Discord link. Thanks to @victorelec14 and @ymittal!
  • Fixed some typos. Thanks to @cristiantroy!
  • ./ethd keys delete fixed
  • ./ethd keys prepare-address-change works with Prysm
  • Nethermind dashboard fixed
  • SSV dashboard fixed
  • Fixed the pre-provisioned high memory alert in Grafana

v2.6.0.0 2024-01-25

This is an optional release with new features and bug fixes

Breaking changes

  • Requires Lighthouse 4.6.0 or later

New features

  • Supports ./ethd prune-lighthouse to prune Lighthouse state
  • Lighthouse VC will broadcast duties to all configured CLs, and uses v3 API for producing blocks
  • Besu on machines with 64 GiB of RAM or more will use the high spec flag
  • Added Bloxroute relay to default Holesky MEV config
  • Prysm uses 70 max peers by default
  • ./ethd config offers a VC-only setup on Gnosis Chain. Thanks @haurog!
  • Remove Nethermind memory hints
  • Add network aliases to CLs, ${NETWORK}-consensus. This can be useful in setups with multiple Eth Docker installations on one host, all connected to the same Docker overlay network
  • Changed Prometheus yq dependency to version 4
  • Update Lodestar beacon max-old-space-size to 8192. Thanks @nflaig!
  • Changed Teku default heap size to 5G
  • ./ethd keys does some input vaidation on public keys and other user-supplied values

Bug fixes

  • Nethermind prune no longer outputs an error message on Nethermind 1.25.0 and later
  • Added parameter to support Erigon 2.55 and later

v2.5.0.1 2023-12-31

This is an optional release with new features and bug fixes

  • Breaking for Besu: Requires Besu 23.10.3
  • Besu will limit its trie logs, and on fresh sync heal its flat DB for better RPC performance
  • Besu source build uses Java 21 runtime (but continues to build with Java 17)
  • Additional pre-previsioned Grafana alerts: memory, CPU, out of memory (OOM) kill
  • Geth can keep its ancient directory on a separate path, see ANCIENT_DIR in .env
  • Logs dashboard works if the directory is not called eth-docker
  • Nethermind auto-prune uses 350 GiB threshold again on Gnosis Chain

v2.4.1.0 2023-12-29

This is an optional release with new features and bug fixes

  • Fix ./ethd keys import with unique passwords. Thanks @shamoya!
  • Fix Teku archive sync on Holesky
  • Nethermind auto-prune is network aware: Kicks off at 350 GiB mainnet, 50 GiB otherwise
  • Web3signer PostgreSQL migration to PG16 during ./ethd update
  • Teku source build uses Java 21
  • Slightly less naive offline detection for create-withdrawal-change.sh

v2.4.0.0 2023-12-13

This is an optional release with new features and bug fixes for most users
It is mandatory for users of Teku 23.12.0 who do not wish to use checkpoint sync

  • Breaking change: Teku without checkpoint sync (e.g. archive node) uses parameters that require Teku 23.12.0
  • Fixed checkpoint sync url query during ./ethd config
  • ./ethd keys can set individual Graffiti, as long as the client supports it
  • Prometheus instance hard-coded for easier use with dashboards that use instance
  • Added a pre-provisioned Grafana alert for disk space
  • Renamed Teku and Nimbus -legacy.yml files to -allin1.yml

v2.3.12.0 2023-12-04

This is an optional release with new features and bug fixes

  • Fix Nimbus Web3signer wait loop
  • Add ./ethd space
  • Add Eden relays to Holesky during ./ethd config
  • mev-boost can be source-built
  • ./ethd update can be --non-interactive
  • Support ETHD_FRONTEND=noninteractive as an alternative to --non-interactive

v2.3.11.0 2023-12-01

This is an optional release with new features and bug fixes

  • New Nimbus and Teku deployments use a dedicated validator client service. Legacy deployments use the nimbus-legacy.yml and teku-legacy.yml files
  • Introduced a wait loop to Nimbus when using Web3signer, to work around a bug in Nimbus
  • Better handling of legacy master branch of Eth Docker

v2.3.10.0 2023-11-25

This is an optional release with new features and bug fixes

  • Prometheus metrics collection improved. Scrape targets in ./prometheus/conf.d, uses yq to merge custom-prom.yml. Default scrape interval 15s instead of 1m now possible because of this, which solves a whole bevvy of "No Data" in preloaded dashboards. Thanks to @aliask!
  • Preserve empty RAPID_SYNC_URL in .env
  • Extraneous web3signer messages during keyimport, when web3signer was not in use, resolved
  • ./ethd up <service-name> supported
  • Version numbering will be semver-ish from here: World-shaking changes (think Ethereum merge) first digit, breaking changes second digit, enhancements third digit, bug fixes fourth digit.

v2.3.9 2023-11-15

This is an optional release with new features and bug fixes

  • Eth Docker's version can be pinned in .env
  • Use new Teku v23.11.0 syntax. Breaking for any prior version.
  • Fix the ./ethd prune-geth command
  • Additional IPv6 support for Lodestar, Geth and Erigon
  • Use .NET 8 for Nethermind source build
  • default.env defaults to Holesky testnet

v2.3.8 2023-11-08

This is an optional release with new features and bug fixes

  • Fixed a breaking bug in cl-traefik.yml that impacted 2.3.7
  • Fix ./ethd keys delete all when using Web3signer
  • ./ethd config can now configure SSV for Holesky
  • Switched Prometheus to scrape by Docker labels
  • Added Web3signer dashboard
  • Fixed Nimbus dashboard provisioning
  • Running multiple RPC nodes connected to one central traefik is now easier. If that is your use case, set EL_NODE=http://${NETWORK}-execution:8551 in .env. See the ELCLIENT.yml files for the alias this references.

v2.3.7 2023-11-02

This is an optional release with security relevant changes for traefik users

  • BREAKING change for users who use traefik to access the execution client RPC API, consensus client REST API or execution client engine RPC API: The el-traefik.yml, cl-traefik.yml and el-traefik.yml files are now required for this. This was done to avoid host header attacks against users who just want to expose Grafana and may not have firewall rules in place to trusted source IPs.

v2.3.6 2023-11-02

This is an optional release with new features and bug fixes

  • ./ethd keys send-exit works with RocketPool reverse hybrid
  • Raise Loki ingestion limit. Thanks invis!
  • Prysm uses prysmctl for legacy exit method
  • Erigon source build uses Go 1.21
  • ./ethd config offers Reth alpha
  • Send anonymized traefik usage
  • Fixes to prysm-vc-only.yml. Thanks @nflaig!
  • Scraping metrics centrally is now supported
  • RocketPool integration no longer adds mev-boost.yml
  • Error handler that restores .env if ./ethd update fails. Thanks invis!
  • ./ethd config is a little more visually consistent
  • On Ubuntu, use the docker-compose-v2 package for Docker Compose upgrades
  • Lighthouse Siren fixed. Thanks @davidkassa!
  • Changed default checkpoint URL for Gnosis Chain
  • Added traefik labels to all CL-CLIENT.yml files

v2.3.5 2023-10-11

This is an optional release with new features and bug fixes

  • Support for encrypted node key with an SSV node
  • Remove hard coded ancient barriers for Nethermind, use Nethermind defaults
  • Add tab completion for Linux systems. Thanks @jshufro!
  • Add support for Lighthouse Siren
  • Change Prometheus retention to 40d
  • Configurable Lodestar heap
  • Changed Teku and web3signer integration
  • Add QUIC port to Lighthouse
  • Support Nethermind v1.21

v2.3.4 2023-09-11

This is an optional release with new features and bug fixes

  • ./ethd config offers Holesky testnet
  • Geth fresh sync now uses PBSS
  • SSV supports MEV
  • SSV migrates to new jato-v2 testnet
  • Reth supports full node pruning
  • The auto-prune.sh script has been deprecated and will be removed with Dencun
  • New ./ethd keys sign-exit command for use with clients' keymanager API
  • ./ethd config prompts for MEV when using a RocketPool reverse hybrid setup. Thanks @haurog!
  • ./ethd keys import knows about eth2-val-tools style keys and secrets folders. Thanks to Patches for prodding me!
  • Geth uses its down defaults for HTTP and WS API for easier override via EL_EXTRAS. Thanks @jiangbo0216!
  • Nimbus registers web3signer keys on startup
  • All-new support for custom testnets. Set NETWORK to a github repo containing the network repo such as https://github.com/ethpandaops/dencun-testnet/tree/master/network-configs/devnet-8. Thanks to Barnabas and client teams for the feature request!
  • Binary and source repos can now be specified in .env, to allow use of custom client repos for custom testnets.
  • Upgrading compose V1 to compose V2 no longer marks docker.io for deletion
  • New Nethermind executable name on source build. Thanks @rubo!

v2.3.3 2023-08-15

This is an optional release with new features and bug fixes

  • Fixed an ./ethd terminate edge case that would attempt to delete volumes in other stacks / directories
  • Improved web3signer support; work around a Teku bug
  • Support signing exit messages with keymanager API
  • Teku default heap reduced to 4g
  • Lodestar source build with node 20
  • Lodestar doppelganger flag adjusted. Thanks @nflaig!
  • cadvisor works on ARM64
  • Default to jato-v2 for new SSV setups
  • Geth source build with Go 1.21

v2.3.2 2023-08-03

This is an optional release with new features and bug fixes

  • Update SSV and Nethermind dashboards
  • Update Prysm dashboards
  • Fix Teku VC connecting to Lighthouse CL
  • Fix Nimbus VC using MEV Boost
  • Remove dasel dependency from Nethermind
  • ./ethd config on Gnosis Chain now offers Lodestar
  • Teku default heap changed to -Xmx6g
  • Fix a docker presence check on macOS
  • promtail can write to a remote Loki
  • Loki uses TSDB
  • Fix ./ethd install failing when docker is not yet installed
  • Improvements to Geth and Lighthouse archive node options
  • Reth binary images supported
  • compose V1 EOS message
  • Lodestar forces validator files open in case of lingering lock files
  • ./ethd can stop and restart individual services
  • Configurable traefik and ddns tags
  • Lighthouse source build uses maxperf. Thanks @jimmygchen!
  • Default NM source build target does not build rc targets. Thanks @nu404040!
  • ethdo script fixed when user used a 25th word. Thanks @valefar-on-discord!
  • Source builds updated to use Debian bookworm

v2.3.1 2023-05-17

This is an optional release with bug fixes

  • Add web3signer support
  • Update SSV and Nethermind dashboards
  • IPv6 behind an .env var
  • Add logs dashboard. Thanks @gorillamania!
  • Nethermind works on ARM64. Thanks @natpicone!
  • New prometheus-shared.yml. Thanks @allen-pattern!
  • Fix ./ethd keys when using RocketPool (reverse) hybrid

v2.3.0.1 2023-05-05

This is an optional release with bug fixes

  • Support Nethermind 1.18 prune parameters; switch back to Hybrid prune
  • Graffiti string with & character survives ./ethd update.
  • ./ethd update checks for source-built clients and starts a fresh build
  • Use --nat for Lodestar and Reth
  • deposit-cli.yml no longer causes error messages during ./ethd update.
  • Nethermind dasel dependency to 2.2.0
  • Fix Lodestar and Nimbus entrypoint script on fresh sync

v2.3 2023-05-01

This is a recommended release

  • Address findings from Sigma Prime security audit. Users of ee-shared.yml or ee-traefik.yml should pay particular attention.
  • Nethermind prune reduced to 2 threads, to have more headroom during sync committees.

v2.2.10.1 2023-04-29

This is an optional release

  • validator exit for Lighthouse and Nimbus works if there are subdirectories in .eth/validator_keys. Thanks @gorillamania!
  • Add dashboard for Reth.
  • traefik revamped, new v6-aware DDNS provider for traefik-cf.yml.
  • Lighthouse enables v6 by default.

v2.2.10 2023-04-23

This is a mandatory release for users of Erigon, and optional for all others

  • Support Erigon v2.43.0.
  • Initial work on IPv6 support.
  • Fix infinite loop in create-withdrawal-change.sh.
  • traefik-cf.yml can use more granular token permissions.

v2.2.9.5 2023-04-16

This is an optional release

  • Use docker compose if it and docker-compose are installed.
  • Nethermind memory hint higher for 64 GiB RAM.
  • create-withdrawal-change.sh handles 12-word mnemonics.
  • Nimbus validator exit changed to fit new Nimbus behavior.
  • New command ./ethd keys sign-exit from-keystore [--offline] to create pre-signed exit messages.

v2.2.9.4 2023-04-13

This is an optional release with bug fixes

  • ./ethd resync-consensus fixed for Prysm and Lodestar. Thanks @FloatingUpstream!
  • ./ethd resync-consensus can now wipe Teku and Nimbus DB safely, without touching keys.
  • Prysm uses the gcr.io docker image registry. Thanks @FloatingUpstream!

v2.2.9.3 2023-04-12

This is an optional release

  • Nethermind uses Full pruning mode instead of Hybrid.
  • Nethermind uses a lower memory hint to resolve OOM during prune.
  • Nethermind archive mode fixed.
  • Support for stake fish, staked.us and allnodes withdrawal change. Thanks @valefar!

v2.2.9.2 2023-04-09

This is an optional release with bug fixes

  • Teku CL uses liveness tracking so doppelganger detection actually works.
  • ethdo now works with reverse hybrid setups, and similar setups where the CL is remote.
  • Undo a too-aggressive shell lint change, so saying "no" to Grafana works again.
  • Adjust Nethermind prune threshold to account for it using MB not MiB.
  • Adjust Nethermind memory hint in the hopes it won't OOM during prune.
  • Withdrawal credential change readme clarification around the mnemonic that is needed.

v2.2.9.1 2023-04-03

This is an optional release with bug fixes

  • Support Teku doppelganger detection.
  • ./ethd keys send-address-change counts unique addresses. Thanks to @valefar for fixing the logic!
  • Shell lint pass, which fixes a bug in ./ethd prune-nethermind and ./ethd install.

v2.2.9 2023-04-01

This is an optional release

  • Add automatic pruning to Nethermind, controlled by AUTOPRUNE_NM in .env.

v2.2.8.7 2023-03-31

This is an optional release

  • Remove soft max heap from Teku and Besu default JVM heap settings.
  • Resolve failure when upgrading from eth-docker 2.2.8.3 or earlier.
  • Dasel dependency upgraded to 2.1.2.
  • reth.yml sets the P2P port.
  • Remove check for apparmor.
  • ./ethd install now requires Ubuntu 20.04 or later or Debian 10 or later.
  • ./ethd warns the user if they are using Compose V1.

v2.2.8.6 2023-03-26

This is a bugfix release

  • Fix a bug introduced in 2.2.8.5 that would break Graffiti with spaces. Thanks @nflaig!
  • New command ./ethd keys delete all

v2.2.8.5 2023-03-25

This is an optional release

  • Support client default graffiti - use this for Lodestar incentive
  • Add Lodestar beaconcha.in monitoring. Thanks @nflaig!
  • Keymanager works on ARM64
  • Rely on default ethdo timeout
  • Require 250 GiB free for Nethermind prune
  • Only overwrite .env.bak when there are changes
  • Warn user if git pull fails during ./ethd update

v2.2.8.4 2023-03-21

This is a bugfix release

  • Fix a bug during disk space check in ./ethd introduced by 2.2.8.3

v2.2.8.3 2023-03-20

This is an optional release

  • ./ethd resync-execution and ./ethd resync-consensus commands added
  • origins for Geth ws set to * - thanks @0xDualCube
  • Query for mnemonic passphrase when generating change message
  • Link to beaconcha.in broadcast tool

v2.2.8.2 2023-03-18

This is an optional release

  • ./ethd will check for free disk space and warn the user if it's running low
  • Fix and pin ethereum-metrics-exporter
  • Default Graffiti uses 🦉
  • Erigon supports larger return values for RocketPool >= 1.9
  • Erigon and Prysm source builds use Go 1.20
  • Lighthouse source build uses jemalloc and defaults to stable target
  • Prysm supports larger messages so credential change messages can be sent
  • Initial web3signer addition - not integrated with any clients
  • Don't query for mev-boost on Gnosis Chain
  • Add auth port for Reth

v2.2.8.1 2023-02-19

This is an optional release

  • Online/offline withdrawal change workflow now actually works 😅
  • Geth will use PebbleDB on a fresh sync
  • Zhejiang testnet supported with Lodestar and Nethermind
  • Change default docker tag for Besu to latest
  • Remove legacy keyimport in preparation for security audit

v2.2.8 2023-02-08

This is an optional release

  • Fixed ethereum-metrics-exporter. Thanks to @nflaig!
  • Added the ability to use client-default graffiti. Thanks to @nflaig!
  • ./ethd install places the user into the docker group on Debian
  • Support online/offline withdrawal address change with ethdo. See ./ethd keys

v2.2.7.1 2023-02-05

This is an optional release

  • Nimbus engine connection defaults to http:// instead of ws:// on a fresh install
  • Teku uses the MINIMAL mode when running pruned
  • Nethermind workaround for Prysm, --JsonRpc.MaxBatchSize 10000
  • New command ./ethd cmd run deposit-cli-change to prep for withdrawal credential changes, if deposit-cli.yml is included and deposit-cli supports this
  • Flashbots URL change
  • Check for apparmor on Ubuntu and Debian because of an issue with docker-ce 23.0.0
  • Pre-provision homestaking dashboard id 17846. Thanks to @gwenvador!

v2.2.7 2023-01-20

This is an optional release

  • New advanced option ARCHIVE_NODE in ./env. Caution that this can use upwards of 12TB of disk space.
  • Nethermind source build uses .NET 7.0
  • Lodestar prometheus scrape fixed. Thanks @nflaig!
  • Nethermind pruning requires 200 GiB free, down from 250 GiB
  • Extremely experimental support for Reth - it does not yet sync
  • ./ethd config offers Erigon when running on Gnosis Chain
  • Update Nethermind's dasel dependency to v2.1.0
  • All source builds can now build from a tag, a branch, or a PR
  • ./ethd update will also run docker system prune --force to remove dangling images and build caches

v2.2.6.3 2023-01-06

This is an optional release

  • Update Ethereum metrics exporter dashboard to latest version
  • Add ultrasound relays to default list - thanks @JustinDrake! 🦇🔊
  • A few fixes for ./ethd on macOS
  • ./ethd config builds only once 😅
  • ./ethd update now defaults to keeping changed build targets, and can reset them to defaults with --refresh-targets
  • New ./ethd keys create-prysm-wallet for better UX when using Prysm
  • Remove return code workaround for Lodestar from key management script

v2.2.6.2 2022-12-31

This is an optional release

  • Increase stop timeout for all EL to 5 minutes "just in case"
  • Explicit permissions for all scripts in Dockerfile - thanks to @mLewisLogic for finding a corner case!
  • Run Grafana as a non-root user
  • Explicit NAT method added to Besu - thanks to @dabauxi!
  • Update Nethermind's dasel dependency to v2.0.2

v2.2.6.1 2022-12-23

This is an optional release

  • Add --rpc-max-logs-range=65536 to besu.yml to support SSV and RocketPool out of the box
  • Fix handling of non-standard Docker data-root. Thanks to @mLewisLogic!
  • Added grafana-rootless.yml for use with rootless docker.

v2.2.6 2022-12-22

This is a required release for users of Nimbus, and optional for all others

  • Support Nimbus v22.12.0. This is a breaking change, no prior releases of Nimbus are supported.
  • ./auto-prune.sh now supports Nethermind. There is a risk that this breaks if Nethermind takes >24 hours to prune and the crontab is run every 24 hours. Feedback welcome.
  • ./auto-prune.sh now supports --threshold and --help
  • Pruning logic now recognizes a non-standard docker data-root directory
  • Host map additional P2P ports for Erigon: It uses a separate port for each eth/xx P2P protocol.
  • Remove Nethermind metrics push timeout, as it no longer has a default pushgateway
  • Fix an issue that had ./ethd update build everything twice

v2.2.5.1 2022-12-15

This is a required release for users of Teku, and optional for all others

  • Fix Teku keymanager API cert. Thanks to @alepacheco for raising the issue!

v2.2.5 2022-12-08

This is a required release for users of Erigon and Nethermind, and optional for all others

  • Experimental support for Nimbus EL client, nimbus-el.yml
  • Remove --metrics.expensive from Erigon for 2.31.0 support
  • Be more deliberate about versions of dasel, alpine and traefik

v2.2.4.2 2022-12-02

This is an optional release containing new features and bug fixes

  • Nethermind source build fixed. Thanks @nu404040!
  • Reverted use of Bonsai snapshots. Note this can cause initial snap sync to fail, but should resolve failure after initial sync. Thanks @realsnick!
  • Replace which with command -v in ethd to get ready for Debian Bookworm
  • Add Nimbus as an option for Gnosis Chain during ./ethd config
  • Image pull during ./ethd update is more consistent

v2.2.4.1 2022-11-25

This is a required release for users of Nethermind on Gnosis, and optional for all others

  • Let Nethermind determine sync mode based on chain
  • Better Nethermind prune. Thanks to Joe at RocketPool for the suggestion!
  • Some more cleanup around the removed Prometheus alert manager
  • Remove Akula 😭
  • Fix an error introduced by shell linting that caused ./ethd terminate to fail - thanks to @RomanS-re!

v2.2.4 2022-11-22

This is a required release for users of Nethermind, and optional for all others

  • Support Nethermind's new engine port parameters
  • ./ethd attach-geth command, thanks to @ldub!
  • Removed Prometheus alert manager - it had been broken since before merge, may as well remove it 😅. Use Grafana's built-in alert manager instead, please
  • Sample config file for Grafana Cloud in prometheus/custom-prom.yml.sample
  • Require 250GiB free disk space before starting Nethermind prune

v2.2.3.1 2022-11-16

This is a required release for users of Akula, and optional for all others

  • Fixed Akula source build
  • Lint pass on all shell scripts
  • Added deprecation warning to ./ethd keyimport
  • Prometheus now uses default scrape time, so that custom-prom.yml will work with grafana-cloud.yml

v2.2.3 2022-11-13

This is an optional release containing new features

  • Work around Lodestar's non-standard return codes on recipient/gas keymanager API
  • Keymanager API key import now waits up to 60s for slashing protection DB to be imported
  • Support Nethermind health checks
  • Use beaconcha.in's stat collector for Prysm and Nimbus

v2.2.2 2022-11-11

This is a required release for users of Erigon, and optional for all others

  • Support Erigon 2.30.0's new --externalcl parameter. This is a breaking change, no prior versions of Erigon are supported.
  • Fix test for custom-prom.yml used in grafana-cloud.yml
  • Support MEV boost -minbid
  • Check for 125 GiB free disk space before Nethermind prune
  • Dynamic wait time when re-starting Nethermind for prune

v2.2.1 2022-11-05

This is a required release for users of Erigon, and optional for all others

  • Support Erigon 2.29.0's new log level parameter
  • More debug info for sporadically failing Nethermind prune

v2.2.0 2022-11-02

This is a recommended release with new features and bug fixes

  • Nethermind background pruning via ./ethd prune-nethermind
  • Bonsai snapshots supported with Besu
  • New grafana-cloud.yml that uses prometheus/custom-prom.yml. Undocumented for now
  • Do not default to --subscribe-all-subnets for cl-only.yml files. Please add this via CL_EXTRAS if you need it
  • Geth always runs an apk update first when building the local image
  • Fix provisioning of the prysm_less_10 dashboard. Thanks @FloatingUpstream!
  • Support Teku's validator exit command for API managed keys
  • Better UX for initial Blox SSV setup
  • Add 30d retention period to Loki
  • Moved CL_EXTRAS, EL_EXTRAS and VC-EXTRAS into entrypoint script
  • slasher.yml files removed. If you used these, please use CL_EXTRAS instead
  • Enable pprof on Erigon and optimize for ZFS storage
  • cadvisor does housekeeping every 30s
  • Manifold removed from default relay list
  • Nimbus VC offered during ./ethd config

v2.1.3 2022-10-06

This is an optional release with new features

  • Erigon uses stable docker tag
  • Erigon uses --batchSize 64m in an attempt to squeeze it into 16 GiB 🐭
  • Besu defaults to latest-openjdk-latest and uses soft heap 3g
  • Add Nimbus vc-only yml
  • Erigon and Nimbus source builds default to latest release
  • Remove all OVERRIDE_TTD mentions

v2.1.2 2022-10-04

This is an optional release with bug fixes

  • Prometheus now survives restarts 😅
  • Quiet Nethermind push failures
  • Fix ext-network.yml version

v2.1.1 2022-10-02

This is an optional release with new features and bug fixes

  • Added BESU_HEAP and TEKU_HEAP variables to override the default Java heap settings for each
  • Fixed a bug in the new Prometheus yml handling for Nimbus and Teku
  • Default Besu to 5g heap, up from 4g
  • Source builds use Go 1.19
  • Add new dependency for Lighthouse source build

v2.1.0 2022-09-29

This is an optional release with new features

  • ./ethd install now installs docker-ce
  • ./ethd config offers existing values
  • EL clients no longer start as root - chown no longer needed post-merge
  • ./ethd update warns the user if there are uncommitted local changes

v2.0.4 2022-09-28

This is an optional release with new features

  • Added a default dashboard for Nethermind
  • Reworked yml processing for Prometheus targets
  • Added cadvisor for Prometheus, and a dashboard for it
  • Added ethereum-metrics-exporter for Prometheus, and a dashboard for it
  • Added the ability to specify optional parameters for CL/EL/VC in .env

v2.0.3 2022-09-25

This is an optional release with new features

  • Added Lodestar metrics, and a dashboard for it
  • Added ./ethd version command. Thanks to @PabloCastellano!
  • Teku rapid sync works with checkpointz
  • Renamed all client-base.yml files to client.yml
  • Lodestar supports validator exit again

v2.0.2 2022-09-16

This is a recommended release for post-merge changes

  • Use current mev flag naming for Lighthouse VC
  • Improved key import
  • Fix Teku beacon stats API
  • Teku can recover from unclean shutdown
  • Add relay check to mev boost
  • Lodestar mev boost and rapid sync fixed
  • More resilient checkpoint sync for Nimbus and Lodestar
  • Use sudo automatically as and if needed
  • traefik metrics - thanks to @casualjim
  • Teku counts deposits more slowly to interop better with Besu
  • Teku -Xmx5g instead of -Xmx4g, to follow the team's recommendations
  • Teku voluntary exit works with API-imported keys
  • validator-backup command for Prysm
  • Erigon metrics fixed, thanks @casualjim
  • MEV_NODE and MEV_DOCKER_TAG survive updates
  • Config wizard no longer asks for override TTD

v2.0.1 2022-08-24

This is a recommended release for the Ethereum Merge

  • Support Lodestar v1.0.0
  • Besu defaults to snap sync, after some issues with checkpoint sync
  • Use new engine API syntax for Prsym
  • Use fee recipient with Teku CL only
  • Use current SSV v2 repo
  • Fix Grafana for SSV v2
  • Fix default dashboard for Nimbus

v2.0.0 2022-08-22

This is a mandatory release for the Ethereum Merge

  • Breaking Change docker-compose v1.28.0 or later is required. ./ethd update will prompt for it
  • Breaking Change Erigon needs to be resynced from scratch and will run on its alpha branch. ./ethd update will prompt for it
  • Breaking Change Infura "web3" fallback for the Execution Layer connection is no longer supported
  • Many changes to .env. ./ethd update will make these automatically
  • merge-ready config with Engine API and JWT secret between Consensus Layer and Execution Layer
  • Doppelganger Protection supported
  • mev-boost supported
  • New ./ethd install command that attempts to install prerequisites on Ubuntu
  • Support Sepolia and Ropsten testnets, in addition to Goerli
  • Ability to import slashing protection DB
  • Better checks for prerequisites existing in ./ethd. Thanks to joeytwiddle
  • Automatic sudo in ./ethd if required. Thanks to joeytwiddle
  • Keymanager support for Lodestar
  • Besu defaults to checkpoint sync
  • Teku VC supports failover CLs

v1.8.8 2022-07-13

This is an optional release, that contains new features and bug fixes

  • ./ethd now works with docker-ce and compose plugin, including on Debian 11
  • Support spaces in Graffiti
  • Fix a regression in ./ethd prune-geth

v1.8.7 2022-06-25

This is an optional release, that contains new features and bug fixes

  • ./ethd update now always runs the latest version of itself
  • ./ethd update aborts when a user chooses "Cancel" on the fee recipient screen
  • FEE_RECIPIENT variable in .env instead of REWARDS_TO
  • Improve Lighthouse memory allocation defaults
  • Gracefully handle sudo ./ethd update
  • Automatic switch to the rpc-nodes branch is clearer
  • Keep Teku key management API TLS cert from being deleted all the time

v1.8.6 2022-06-14

This is an optional release, that contains new features and bug fixes

  • ./ethd prune-geth now correctly asks for confirmation
  • ./ethd update will nag users about running both a CL and EL. Nag screen can be overridden via .env setting

v1.8.5 2022-06-11

This is an optional release, that contains new features and bug fixes

  • Keep Lodestar build targets
  • Suppress Nethermind JSON RPC logs
  • Fix genesis download for Prysm on Prater
  • Change SSV node default ports
  • Hardcode ./.eth as the directory for key files
  • Fix help URL displayed during ./ethd config
  • Fix Lighthouse validator startup
  • Rename Prater to Görli
  • Stop tracking changes to ext-network.yml
  • Improve peer count adjustment, a MIN can now be set
  • Change default Teku peers to 100
  • Verify rewards address for correctness on ./ethd update
  • Better UX / question flow during ./ethd config
  • Clearer warning not to ./ethd restart without a rewards address
  • Besu now defaults to snap sync
  • CL_NODE will now inherit the CC_NODE setting on ./ethd update

v1.8.4 2022-05-24

This is an optional release, that contains new features and bug fixes

  • Breaking change: OpenEthereum oe.yml has been removed, now that OpenEthereum is officially end of support and its repo has been archived
  • Fixed ethd to once more work on macOS
  • Besu is now offered as a choice on ARM64
  • All clients that support it now use --suggested-fee-recipient
  • Changed language of message box that prompts for fee recipient, to be clearer
  • Added validator-list command

v1.8.3 2022-05-19

This is an optional release, that contains new features and bug fixes

  • Highly, highly experimental support for Akula. Do not use in production
  • A few fixes around CL/EL NewSpeak
  • Lodestar can import multiple keystores non-interactively
  • staking-deposit-cli moved to Python 3.10
  • ./ethd update prompts for an Ethereum rewards address for priority fees and MEV, to be used post-merge. Currently only and exclusively actually being used by lh-validator.yml

v1.8.2 2022-05-07

This is an optional update, that contains new features

  • Experimental support for Prysm rapid sync
  • Use JDK 17 to build Besu from source
  • Remove consensus-only files and keep them in rpc-nodes branch only. Ditto remove old grafana yml files. This is meant to make the main branch more approachable.

v1.8.1 2022-04-26

This is an optional update, that contains new features

  • Remove advanced yml files from main branch. Please use the rpc-nodes branch if you are running a distributed environment.
  • ./ethd update removes and renames yml files in COMPOSE_FILE and will automatically switch the branch for users of advanced yml files.

v1.8 2022-04-21

This is an optional update, that contains new features

  • Close Promtail/Loki ports
  • Support Gnosis Beacon Chain with ./ethd config

v1.7.8 2022-04-16

This is an optional update, that contains new features

  • Prometheus metrics for all execution clients
  • Remove node dashboard because it had Grafana alerts
  • Update RocketPool integration for RocketPool 1.3.0
  • *-consensus.yml now subscribe to all subnets, which is helpful for staking at scale
  • Add prometheus-traefik.yml for use with federation or just to make it available via https://
  • Support Blox SSV 0.1.11 and later

v1.7.7.2 2022-03-28

  • Switch to Go 1.18 for source builds
  • Fix Nimbus Gnosis source build

v1.7.7.1 2022-03-22

  • Lighthouse default peers 80 to fit new guidance
  • Bonsai tries for Besu with GA flag - thanks to @JustNotHelpful
  • Nimbus switched back to use ws:// for web3 connections
  • Prysm source build no longer attempts to build standalone slasher

v1.7.7 2022-03-14

This is an optional update, that contains new features

  • Breaking change: prysm-consensus-rest.yml removed, and prysm-consensus.yml changed to only support REST. Remote RPC is no longer available.
  • Remove deprecated Nimbus RPC and use REST
  • Improve Nimbus source build; support building Nimbus for Gnosis Chain

v1.7.6.1 2022-03-05

This is an optional update, that contains new features

  • New teku-stats.yml to support beaconcha.in stats with Teku
  • Better tzdata installation on Debian images
  • Logs available in Grafana via Loki

v1.7.6 2022-02-16

This is an optional update, that contains new features and bugfixes

  • ./ethd update no longer overwrites an empty GRAFFITI
  • Support for Nimbus rapid sync
  • Support for Nimbus CORS on keymanager (experimental)
  • Switched default Nimbus web3 URL from ws:// to http://

v1.7.5.1 2022-02-09

This is an optional update, that contains new features

  • ./ethd prune-geth will now restart Geth after prune. Thanks to Joe @ RocketPool for the idea!
  • The auto-prune.sh script no longer asks for user input

v1.7.4.4 2022-02-08

This is an optional update, that contains new features and bug fixes

  • prysm-consensus.yml now only exposes REST, no longer gRPC. This is a breaking change if you are using a remote Prysm validator with it!
  • Fixed Lodestar rapid sync to use the new format
  • Fixed Lodestar execution client connection to use the new format
  • Nethermind log level fixed
  • ./ethd update no longer shows an error when coming from an older version of eth-docker

v1.7.4.3 2022-02-05

This is an optional update, that contains new features

  • Support staking-deposit-cli v2.0.0

v1.7.4.2 2022-02-04

This is an optional update, that contains new features

  • Experimental support for the standardized key management API, exposed on localhost port 7500 with consensus-keyapi-localport.yml or validator-keyapi-localport.yml, depending on whether the specific client has a separate validator container.
  • Warn when Ubuntu "snap" docker is found
  • Default to Lighthouse latest-modern image
  • Nethermind no longer uses an ancient barrier. This means other clients can sync from it.

v1.7.4.1 2022-02-01

This is a bugfix update

  • Grafana dashboards retain their variables across restart
  • ./ethd config and ./ethd update now warn when a snap install of Docker is found

v1.7.4 2022-01-30

This is an optional update, that contains new features

  • Fixed Lodestar
  • Initial support for integration with Wagyu installer
  • ./ethd keyimport command
  • Experimental support for Key Manager API on Nimbus, on 127.0.0.1:5053

v1.7.3 2022-01-29

This is an optional update, that contains new features

  • MacOS support. Thanks to suburbandad!
  • Nethermind no longer uses ancient barriers, so other clients can sync from it
  • CORS origin * throughout so Metamask works
  • geth-prune now wants 40GB free instead of 50GB
  • Improved Besu source build

v1.7.2.5 2022-01-21

This is a bugfix update, and also contains new features

  • Fix Lodestar validator startup path - yep that means no-one was running it :)
  • Remove /etc/timezone throughout - the -notz.yml files should no longer be used on Amazon Linux 2
  • Added Nethermind as an option on arm64

v1.7.2.4 2022-01-14

This is an optional update, that contains new features

  • Support Nimbus validator monitor
  • Improved ./ethd config for RocketPool

v1.7.2.1 2022-01-14

This is an optional update, that contains new features

  • Revamped ./ethd config for easier integration with RocketPool and Blox

v1.7.1 2022-01-12

This is an optional update, that contains new features

  • Added a Grafana dashboard for Besu.

v1.7.0 2022-01-11

This is an optional update, that contains new features

  • Overhauled the Grafana dashboards. Please report issues.

v1.6.9 2022-01-10

This is an optional update, that contains new features

  • Support running blox-ssv node via eth-docker

v1.6.8 2022-01-07

This is an optional update, that contains new features and bug fixes

  • Traefik web proxy no longer uses wild card certs
  • Nimbus no longer uses --subscribe-all-subnets when run as a consensus client only
  • Fixed a permissions issue with ./ethd prune-geth

v1.6.7 2022-01-02

This is an optional update, that contains new features and bug fixes

  • Doppelganger protection turned off by default
  • Lighthouse Rapid Sync now works with Grafana enabled

v1.6.5 2021-12-22

This is an optional update, that contains new features

  • ./ethd config now supports Lodestar
  • Source builds for Geth and Erigon switched to Go 1.17 from Go 1.16

v1.6.4 2021-12-17

This is an optional update, that contains new features

  • Prep for Nimbus rapid sync
  • ./ethd config now queries for rapid sync on Lighthouse
  • Erigon supports eth_sendRawTransaction

v1.6.3 2021-12-06

This is an optional update, that contains new features and bug fixes

  • Fixed a bug in lh-validator.yml that would prevent the image building
  • Move LodeStar source build to node.js 16
  • Support for LodeStar consensus client only and LodeStar validator client only
  • Lodestar REST API also on port 5052

v1.6.2 2021-12-06

This is an optional update, that contains new features and bug fixes

  • Fixed a permissions bug with prysm-web.yml introduced in 1.6
  • Consensus REST API consistently on port 5052 for compatibility with RocketPool

v1.6.1 2021-11-27

This is an optional update, that contains new features

  • Added nimbus-consensus.yml to run Nimbus as a remote consensus client
  • Changed prysm-consensus.yml to expose the standard REST API via https://
  • Changed Nethermind source compile to use .NET 6.0
  • Restricted Besu Java heap to 4 GiB

v1.6 2021-11-20

This is an optional update, that contains new features and bug fixes

  • Support the latest Besu release
  • All intermediary scripts that migrate from pre-v1.x setups have been removed. This is a breaking change if you are coming from a v0.x release.
  • -shared.yml files for consensus clients, just for 0neInfra :)

v1.5.10 2021-11-10

This is an optional update, that contains new features and bug fixes

  • Besu defaults to Bonsai tries. This will require a complete resync.
  • Teku validator client uses --network=auto flag
  • Besu allows Metamask connection
  • Added ./ethd rocketeer to change RocketPool config when running hybrid mode
  • Auto-prune permissions issue resolved
  • ./ethd update keeps LS_RAPID_SYNC

v1.5.9 2021-10-11

This is an optional update, that contains new features

  • New docker logging configuration - now when you run out of space, it'll be Geth, not Traefik debug logs
  • Support for Lodestar's checkpoint sync via LS_RAPID_SYNC
  • Fixed Lodestar's binary and source builds: The location of the binary changed

v1.5.8 2021-10-09

This is a bugfix update

  • beacon-chain stats work with the split consensus/validator Lighthouse. Thanks to Faisal Moledina.

v1.5.7 2021-10-09

This is a bugfix update

  • ./ethd prune-geth no longer tries to allocate a TTY, which could cause it to fail.

v1.5.6 2021-10-08

This is a bugfix update

  • lh-stats.yml is now compatible with LH_RAPID_SYNC.

v1.5.5 2021-10-06

This is a bugfix update

  • Removed doppelganger protection from lh-validator.yml, because it does not play well with Teku/Infura

v1.5.4 2021-10-06

This is an optional update, that contains new features

  • Support for Prym's new slasher and Lighthouse's slasher
  • Optional notz files for Lighthouse and Teku, for use with Amazon Linux 2 or similar

v1.5.3 2021-10-01

This is an optional update, that contains new features

  • Support for Lighthouse's new checkpoint sync. Requires LH v2.0.0
  • Support for RocketPool and eth-docker side-by-side, using the consensus client and execution client in eth-docker for both

v1.5.2 2021-09-23

This is an optional update, that contains new features

  • Erigon now uses prune.r.before for a PoS-friendly pruned DB. This is a breaking change for existing Erigon DBs, you'd need to resync
  • ./ethd config sets Geth and Erigon Grafana
  • Erigon available as a choice in ./ethd config
  • New --dry-run flag for auto-prune.sh
  • New --keep-targets flag for ./ethd update

v1.5.1 2021-08-23

This is an optional update, that contains new features

  • Enabled Lighthouse doppelganger protection by default

v1.5.0 2021-08-19

This is an optional update, that contains new features

  • Breaking change The old ETH1_* and BN_* variables have been removed. Please make sure your .env no longer uses them. ./ethd update will convert .env for you.
  • Teku validator-only setup now works better with load-balanced consensus clients such as Infura
  • Erigon now fully prunes, please see Client Setup documentation as to what that means for consensus client initial sync
  • Initial support for ARM64 setups such as Mac M1, Raspberry Pi4, AWS t4g. This has not been extensively tested, feedback very welcome.
  • ./auto-prune.sh script that can be run in crontab and will prune Geth when disk space is below 100 GiB free or below 10% free. Requires the bc package.

v1.4.2.4 2021-07-29

This is a bugfix update

  • Work around a bug in Prysm that kept key import from working
  • Added shared traefik as an advanced option

v1.4.2.3 2021-07-22

This is an optional update, that changes behavior

  • ./ethd update now migrates .env first, then builds new client images. This means that people who change build targets will need to build again after running an update.

v1.4.2.2 2021-07-22

This is a bugfix update

  • Fix CC_HOST not persisting on ./ethd update

v1.4.2.1 2021-07-22

This is an optional update, that adds new features

  • Support for the new Erigon --prune flag
  • Support for Erigon binary builds
  • NB A future release of eth-docker will change the pruning defaults of the Erigon DB, which will require a resync from scratch of the DB.

v1.4.2 2021-07-21

This is an optional update, that adds new features

  • Support the changed beaconcha.in stats API URL

v1.4.1.2 2021-07-21

This is a bugfix update

  • Fixed Teku rapid sync when using grafana
  • Teku now doesn't show initial error messages when using an Infura execution client
  • Created "no timezone" options for teku files, for use with Amazon AMI

v1.4.1.1 2021-07-21

This is a bugfix update

  • Fixed Teku validator-only on lowmem machines

v1.4.1 2021-07-20

This is an optional update, that contains new features

  • Prysm doppelganger protection enabled by default

v1.4.0.1 2021-07-13

This is a bugfix update

  • Fixed fallback execution client for Nimbus

v1.4.0 2021-07-13

This is an optional upgrade, that contains new features

  • Added support for Lodestar consensus client

v1.3.3.2 2021-06-16

This is a bugfix update

  • Fixed ec-traefik.yml
  • Fixed Grafana to use the new consensus name, thanks crymo99!
  • Teku can now run on machines with 8 GiB of RAM, with max heap 4G and soft max heap 2G.

v1.3.2 2021-06-10

This is an optional upgrade, that contains new features

  • Added Grafana metrics for Erigon
  • Grafana metrics for standalone Erigon/Geth via blank-grafana.yml

v1.3.0 2021-06-09

This is an optional upgrade, that contains new features

  • sudo ./ethd prune-geth simplifies pruning Geth
  • Separating consensus client and validator client is now supported for Teku, Lighthouse and Prysm. Please see the Secure Web Proxy instructions.

v1.2.5.2 2021-06-07

This is a bugfix upgrade

  • ./ethd config can correctly configure Teku Rapid Sync again

v1.2.5.1 2021-06-06

This is a bugfix upgrade

  • ./ethd help screen works again
  • sudo ./ethd terminate command introduced

v1.2.5 2021-06-05

This is an optional upgrade, that contains new features

  • Erigon (still in alpha) now syncs a pruned DB
  • ./ethd config now queries the user for desired Graffiti
  • sudo ./ethd update now does a root-safe git pull to update eth-docker itself, and uses a different mechanism to redirect error messages for docker-compose pull, so it can update components like node-exporter with good UX.

v1.2.4 2021-06-05

This is a bugfix upgrade

  • ./ethd update no longer attempts to docker-compose pull or git pull. In some instances the expected error messages from docker-compose pull were not redirected to /dev/null, and updating ancillary components while throwing a bevy of error messages is terrible UX.

v1.2.3 2021-06-04

This is an optional upgrade, that contains new features

  • ./ethd update now migrates .env variables

v1.2.2 2021-06-03

This is an optional upgrade, that contains new features

  • Initial support for erigon via erigon.yml. Source build only.
  • Support for sending stats to https://beaconcha.in from Prysm >= 1.3.10 via prysm-stats.yml. Source build only.
  • Support for sending stats to https://beaconcha.in from Lighthouse >= 1.4.0 via lh-stats.yml. Binary and source builds.

v1.2.1 2021-05-31

This is an optional upgrade, that contains new features

  • ./ethd config now supports setting a fallback execution client
  • Fixed an issue with --folder option when using deposit-cli

v1.2.0 2021-05-28

This is an optional upgrade, that contains new features

  • This release contains breaking changes to .env. Please recreate it from default.env, see above.

  • All v1.x releases change the docker images used to run your node. Please be sure to docker-compose build --pull before (re)starting your node software.

  • Renamed all eth1/beacon references to execution/consensus, to fit with the new naming conventions put forth by the Ethereum developers

  • Note this change will cause warning messages, as both ETH1_ and EC_ variable names are supported. This backwards compatibility will be removed after "Altair", expected August 2021

  • Removed OpenEthereum from ./ethd config as a choice. OpenEthereum will remain a supported execution client until Shanghai, to give users time to migrate.

v1.1.0 2021-05-12

This is an optional upgrade, that contains new features

  • This release contains breaking changes to .env. Please recreate it from default.env, see above.

  • Validator-only option for Teku and Lighthouse!

  • Teku as the default choice in default.env, now that its out-of-the-box RAM use is < 5 GiB

  • If you are using any version prior to v1.0.0 released 2021-05-06: PLEASE UPDATE BEFORE October 2021. The script that adjusts permissions for existing setups will be removed again at that point, and any setups that haven't updated by then would have permissions issues when they do update.

v1.0.0 2021-05-06

This is an optional upgrade, that contains bugfixes and new features

With funding from the Ethereum Foundation, we are at v1.0.0! This update makes significant changes to the way permissions are handled. While this should improve your experience, please be aware that your .env file should likely be re-created with a fresh copy of default.env, and your specific changes copied in. See above for instructions.

  • LOCAL_UID is no longer being used in .env
  • Beacon and Ethereum node containers now run with a "high" user ID, not the user ID of the logged-in user. In order to make this seamless, they use a docker-entrypoint script that changes permissions of existing setups on the fly
  • PLEASE UPDATE BEFORE October 2021. The entrypoint script will be removed again at that point, and any setups that haven't updated by then would have permissions issues when they do update.
  • Prysm now runs on the Prater testnet without the need to manually pass in the genesis state
  • Source builds for Nimbus, Prysm have been fixed; all source builds tested
  • docker-compose build --pull is now much faster
  • deposit-cli has been removed from the CLIENT-base.yml files. If you do wish to use it, rather than generating keys offline, please add deposit-cli.yml to COMPOSE_FILE
  • deposit-cli services have been renamed to deposit-cli-new and deposit-cli-existing
  • The validator-voluntary-exit service has been renamed to just validator-exit
  • Support for voluntary validator exit when using Teku
  • Preliminary beta configuration script, run ./eth2d.sh for a quick setup

v0.3.1 2021-04-22

This is an optional upgrade, that adds new features

  • Added support for new Teku 21.4.1 features: eth1 failover endpoints, and rapid weak subjectivity sync from infura eth2 project

v0.3.0 2021-04-21

This is an optional upgrade, that adds new features

  • Added Traefik reverse proxy for secure access to Grafana and Prysm Web, even eth1 clients. Note this is a breaking change for existing Grafana, Prysm Web and shared/standalone eth1 clients. You will need to add grafana-insecure.yml, prysm-web-insecure.yml, eth1-insecure.yml, depending on service you use, to your COMPOSE_FILE inside .env. Alternatively and recommended, add traefik-cf.yml or traefik-aws.yml and start using secure https:// ! Please see reverse proxy instructions.
  • Added wizard.sh shell script for quick initial setup
  • Added node reporter Grafana dashboard to alert on low CPU, Memory or Disk Space

v0.2.7 2021-03-10

  • Supports Prysm 1.3.3
  • Changed default for Prysm peers to 45
  • default.env no longer needs GETH1_NETWORK thanks to Geth 1.10.x

v0.2.6.1 2021-02-08

  • Nethermind pruning on by default
  • Nimbus ENR IP auto-update on by default

v0.2.6 2021-01-26

  • Added alert manager code. Thanks to @DarrenMa!

v0.2.5.4 2021-01-21

  • Support for new Lighthouse Validator Monitor Grafana Dashboard
  • Better Grafana port handling for use on cloud VPS with ufw
  • OpenEthereum defaults to release tracking with the release of 3.1.1

v0.2.5.3 2021-01-18

  • Changed Nimbus source build to use post-1.0.6 make target and binary names
  • Support for simplified Web UI in Prysm 1.1.0. NB: prysm-web.yml no longer includes prysm-grafana.yml

v0.2.5.2 2021-01-14

  • Added support for Nimbus voluntary exit
  • Updated Teku source build to JDK15
  • Changed Teku binary docker to new consensys/teku repository
  • Changed default Nimbus source build target to stable

v0.2.5.1 2021-01-09

  • Changed sample-systemd to start services after containerd restart, which helps them survive Ubuntu auto-update

v0.2.5 2021-01-07

  • Support for Nethermind 1.10.x-beta source builds

v0.2.4.2 2020-12-24

  • Support for Lighthouse v1.0.5

v0.2.4.1 2020-12-16

  • Support for Pyrsm fallback eth1 nodes

v0.2.4 2020-12-07

  • Support for new metanull dashboard
  • Initial support for ynager dashboard, eth price not working yet

v0.2.3.3 2020-12-06

  • More time for OpenEthereum to shut down
  • Added documentation on how to restrict access to Grafana when using a VPS

v0.2.3.2 2020-12-01

  • Added max peer values to default.env. Make sure to transfer this from default.env to your .env

v0.2.3.1 2020-11-30

  • Changed Geth shutdown to SIGINT with 2 min timeout so that Geth does not need to resync after sudo docker-compose down. In testing Geth took ~50s to shut down on my entry level server.

v0.2.3 2020-11-29

  • First attempt at Geth Grafana metrics. Does not work for eth1-standalone currently
  • Removed Nethermind manual barrier, as it is now part of Nethermind's default mainnet config

v0.2.2 2020-11-27

  • Lighthouse v1.0.1 validator metrics supported

v0.2.1 2020-11-24

  • Support for Besu eth1 client
  • Fixed an issue with Nimbus log file
  • Removed CORS settings for eth1, for now
  • Tightened hosts values for Geth and Besu

v0.2.0 2020-11-24

  • Support for Lighthouse v1.0.0
  • Change default tags for Lighthouse and Prysm to track v1.0.0 release

v0.1.8.8 2020-11-20

  • Initial attempt at Besu integration. While Besu builds, Lighthouse doesn't communicate with it. Strictly for testing.

v0.1.8.7 2020-11-19

  • Integrated community dashboard for lighthouse, teku, and nimbus.

v0.1.8.6 2020-11-16

  • Nethermind added as eth1 option, thanks to adrienlac. Not stable in testing.
  • First attempt at binary option for all but eth2.0-deposit-cli

v0.1.8.5 2020-11-11

  • Added option to run eth1 node exposed to the host on RPC port

v0.1.8.4 2020-11-08

  • Updated grafana image to change all occurrences of job="beacon" to job=beacon_node in the metanull dashboard.
  • Updated grafana image to rename prysm dashboard titles.

v0.1.8.3 2020-11-07

  • Auto configure Grafana with prometheus datasource.
  • Auto Add Metanull's Prysm Dashboard JSON to Grafana
  • Auto Add Prysm Dashboard JSON to Grafana
  • Auto Add Prysm Dashboard JSON for more than 10 validators to Grafana

v0.1.8.2 2020-11-06

  • Add OpenEthereum eth1 client option

v0.1.8.1 2020-11-05

  • Experimental Prysm slasher - thank you @danb!
  • Fixed Prysm Grafana which got broken when pulling out Prysm Web

v0.1.8 2020-11-04

  • eth2.0-deposit-cli 1.0.0 for Ethereum 2.0 main net
  • First stab at Lighthouse voluntary exit
  • More conservative build targets for Lighthouse, Prysm, Teku, and Geth: Latest release tag instead of master

v0.1.7.5 2020-10-29

  • validator-import for Teku now understands Prysm export

v0.1.7.4 2020-10-29

  • Support experimental Prysm Web UI

v0.1.7.3 2020-10-27

  • Prysm change to remove creation of new protection DB, Prysm no longer has this flag

v0.1.7.2 2020-10-23

  • Prysm changes to allow creation of new protection DB and remove experimental web support while it is in flux

v0.1.7.1 2020-10-16

  • Prysm renamed accounts-v2 to accounts, keeping pace with it

v0.1.7 2020-10-15

  • Added "validator-voluntary-exit" to Prysm
  • Default restart policy is now "unless-stopped" and can be changed via .env
  • Preliminary work to support Prysm Web UI, not yet functional
  • Changed testnet parameter for Prysm to conform with alpha.29
  • Use --blst with Prysm by default for faster sync speed
  • Handles Terms Of Service for Prysm, user is prompted during validator-import, and choice is remembered
  • If you are upgrading this project and you are using Prysm, please run sudo docker-compose run validator and accept the terms of use. You can then Ctrl-C that process and start up normally again. This step is not necessary if you are starting from scratch.

v0.1.6 2020-10-09

  • Support for Lighthouse v0.3.0, drop support for v0.2.x
    • Please note that Lighthouse v0.3.x makes a breaking change to the beacon db. You will need to sync again from scratch, after building the new v0.3.0 beacon image. You can force this with sudo docker-compose down, sudo docker volume rm eth2-docker_lhbeacon-data (adjust to your directory path if you are not in eth2-docker, see sudo docker volume ls for a list).
    • Likewise, the location of the validator keystore has changed. The fastest way to resolve this involves importing the keystore from scratch: sudo docker volume rm eth2-docker_lhvalidator-data (as before, adjust for your directory), and then import the keystore(s) again with sudo docker-compose run validator-import. Your keystore(s) need to be in .eth2/validator_keys inside the project directory for that.
    • When you have completed the above steps, bring up Lighthouse with sudo docker-compose up -d eth2 and verify that the beacon started syncing and the validator found its public key(s) by observing logs:
      sudo docker-compose logs -f beacon and sudo docker-compose logs validator | head -30, and if you wish to see ongoing validator logs, sudo docker-compose logs -f validator.
    • The beacon will sync from scratch, which will take about half a day. Your validator will be marked offline for that duration.