Changelog
Updating Eth Docker
To update the components of Eth Docker, run from within its directory (cd ~/eth-docker
by default):
./ethd update
. This fetches new client version(s), a new Eth Docker, and updates.env
, keeping your modifications. If you want to reset the source or binary build targets in.env
, run./ethd update --refresh-targets
instead../ethd up
- use the new client version(s)
On 1/27/2022, Eth Docker's repository name changed. Everything should work as it did. If you do wish to manually update your local reference, run
git remote set-url origin https://github.com/eth-educators/eth-docker.git
v2.12.3.0 2024-09-20
This is a recommended release
Changes
- Support Lido CSM module. Thanks @dgusakov, @vgorkavenko and @cnupy!
- Add non-censoring Titan relay to mainnet default
- Remove Eden relay from defaults
- Do not switch Erigon repo to
erigontech/erigon
, yet, until images there containlinux/amd64
Bug Fixes
grafana.yml
andgrafana-cloud.yml
work with Docker27.3.0
and later. Thanks u/ChewsMacRibs!- Fix incorrect method name during
./ethd update
. Thanks @kajeagentspi!
v2.12.2.0 2024-09-14
This is an optional release
Changes
- Reth full sync now supports RocketPool, SSV and StakeWise by including their contracts for eth_getLogs / receipts.
If you have an existing synced Reth, you'd need to make the change to
reth.toml
manually. - Erigon now defaults to the new
erigontech/erigon
repo andlatest
tag - Updated SSV dashboards
- Add
./ethd keys count
command. Thanks @Hydepwns! - Persist Web3signer keys registered with Prysm
- Use Go 1.23 for source builds
- Support IPv6 for traefik
- Besu sync mode and RPC API can be configured with
EL_EXTRAS
- Do not override Nethermind's
--Pruning.CacheMb
, as it was causing performance issues - Offer Prysm on ARM64
- Offer Erigon on ARM64
- Clarify the OS version nag
- Source build for Teku and Besu uses Noble Numbat
- Fresh sync of Besu, Geth or Nethermind prefers a Docker volume without
eth1
in the name
Bug fixes
- Only use
sudo
fordkg_output
directory permission changes when needed. Thanks @jshufro!
v2.12.1.0 2024-08-10
This is an optional release
Changes
- Support Erigon v3, including Caplin. To use Caplin, do not use an external CL
- Use early attestations with
teku-vc-only.yml
. Thanks @b0a7!
v2.12.0.0 2024-08-08
*This is a mandatory release for users of Lodestar 1.21.0 and above
Breaking changes
- Require Lodestar
1.21.0
or later
v2.11.2.0 2024-08-08
This is an optional release
Changes
- Support IPv6 with Teku
24.8.0
- Users can freely set the Nethermind RPC namespaces through
EL_EXTRAS
v2.11.1.0 2024-08-01
This is a mandatory release for users of Lighthouse Siren
Changes
- Support Lighthouse Siren 2.0
- Re-enable Nimbus in
./ethd config
when using SSV
Bug fixes
- Support the new Lighthouse dashboards
v2.11.0.1 2024-07-28
This is a recommended release for SSV node operators, with bug fixes
Changes
- Switch Nimbus source build to alpine, from debian
- Support RISC-V architecture in
./ethd config
. Thanks to @lazyprogrammerio and @haurog!
Bug fixes
- Remove Nimbus from SSV config query, see Nimbus PR. Thanks to @jwhelan72, celticwarrior on Ethstaker Discord!
- Allow
--debug
on./ethd keys import
- Only grep
~/.profile
if it exists - Recognize
arm64
(Mac M1/2/3) during./ethd config
v2.11.0.0 2024-07-13
This is an optional release with breaking changes
Breaking changes
- Require Lodestar
1.20.0
or later when usinglodestar.yml
- Require Besu
24.7.0
or later when using./ethd prune-besu
Changes
- Replace Grandine deprecated
--builder-api-url
with--builder-url
- Change Grandine default tag to
stable
fromlatest
- Replace Besu deprecated
storage x-trie-log prune
withstorage trie-log prune
- Reenable Nethermind
--Pruning.CacheMb 4096
on systems with 32 GiB of RAM or more lodestar.yml
uses SSZ wire format and no longer specifies the REST namespace. Thanks @nflaig!
v2.10.1.0 2024-07-10
This is an optional release with new features
New features
- Add
./ethd prune-reth
command. This should be run once only, when upgrading from Reth 1.0.0- While Reth 1.0.0 is running and fully synced,
./ethd update
. This brings in Reth 1.0.1 but does not activate it yet. ./ethd prune-reth
. This prunes the Reth database, then restarts Reth. All other changed containers are also restarted.
- While Reth 1.0.0 is running and fully synced,
Bug fixes
./ethd keys
works with Prysm again- Choosing "No" for SSV DKG during SSV configuration no longer quits ethd
v2.10.0.0 2024-06-23
This is an optional release with breaking changes
Breaking changes
- Require Prysm
5.0.4
or later; enable Prysm QUIC port - Remove explicit Besu trie log limit, as it is default from
24.6.0
on
New features
- Add a
network
label to the metrics
Bug fixes
- Prysm can fetch genesis for Sepolia and Holešky
- Nimbus EL builds and starts again
- Resolve FromAsCasing warnings by Docker
v2.9.2.0 2024-06-11
This is an optional release with new features
New features
- Support Nethermind
1.27
- Switch Lighthouse
latest-modern
tolatest
, to support5.2.0
- Switch Erigon
stable
tov2.60.1
. Please track Erigon versions manually - Migrate existing Prysm and Lighthouse setups to new volume names matching the
cl-only.yml
ones - Enable separate static dir for Reth via
ANCIENT_DIR
- Source-build Besu with JDK 21
- Grandine uses pruned storage when not configured as an archive node
Bug fixes
- DKG
chown
uses the owning user's group and only runs when required - Fix
./ethd sign-exit all
with web3signer and Prysm or Teku - Fix Lodestar source build
- SSV config works on macOS
v2.9.1.0 2024-05-05
This is an optional release with new features
New features
- Support the Grandine consensus layer client
- Migrate to Loki 3. Caution that if you didn't update after 2024-04-09 and before 2024-05-01, this may require you to
stop Loki with
./ethd stop Loki
, remove its volume withdocker volume rm eth-docker_loki-data
(adjust if the directory is not namedeth-docker
), and start again with./ethd up
.
Bug fixes
- Reth DB conversion check works when there are two Reth on the machine
./ethd install
doesn't throw an error if Docker is already installed andpkg-config
is not
v2.9.0.0 2024-04-25
This is an optional release with new features
Breaking changes
- Requires Nethermind
v1.26.0
New features
./ethd prune-nethermind
will migrate the Nethermind DB to HalfPath on nodes with 32 GiB of RAM or more- Add discv5 to Reth
Changes
- Teku default heap to 6g
- Lodestar default max peers to 100
- Use Geth 1.14.0 defaults
- Remove
./ethd prune-geth
Bug fixes
- Do not default Besu to highspec on less than 64 GiB RAM, to avoid OOM errors
- Do not downgrade the
.env
version - Fix Loki and prepare for Loki 3
- Check for snap docker earlier
v2.8.0.0 2024-03-07
This is an optional release with new features
Breaking changes
- Requires Besu
24.3.0
New features
- Supports
./ethd prune-besu
for long-running Besu DBs, to one-off prune trie logs
v2.7.1.0 2024-03-06
This is an optional release with new features and bug fixes
New features
- Supports Reth beta and prompts for resync if coming from Reth alpha
- Update cadvisor to
0.49.1
- Update ethereum-metrics-exporter to
0.23.0
Bug fixes
- Fix
HOST_IP
inallin1.yml
files - Lodestar dashboard shows more metrics
- Fix
./ethd config
not building - Besu high spec more reliably activates with 64 GiB RAM
pull_policy: never
to avoid extraneous builds
v2.7.0.0 2024-02-24
This is an optional release with new features and bug fixes
Breaking changes
- Breaks if
ext-network.yml
was changed. In this case pleasemv ext-network.yml ~
it out to your home directory, try./ethd update
again, and thennano ext-network.yml
and re-apply the changes that were made, likely just the network name asname: rocketpool_net
for reverse hybrid. - Drops support for Docker Compose V1
- Drops support for automatically converting pre-merge (before September 2022) configurations
- Requires Nethermind
v1.25.4
or later
New features
- Changed Lighthouse default max peers to 100, to match their 5.0.0 release
- Lodestar flags updated to use the current convention. Thankls @nflaig!
Bug fixes
- Works more consistently on macOS. Thanks to @alindsilva and @toraonion for raising the issue and testing!
- Fixed
prometheus-traefik.yml
- Fixed the jwt secret that
ethd config
queries for not being saved. Thanks @victorelec14!
v2.6.1.0 2024-02-10
This is an optional release with new features and bug fixes
New features
./ethd sign-exit all
will sign a voluntary exit message for all loaded validators./ethd update --help
will print help specific to theupdate
command- Added a Graffiti length check to
./ethd config
- Changed the CloudFlare DDNS container, as the old one is no longer supported upstream
- Source compile for Geth, Prysm, Erigon and mev-boost uses Go 1.22
Bug fixes
- Updated Discord link. Thanks to @victorelec14 and @ymittal!
- Fixed some typos. Thanks to @cristiantroy!
./ethd keys delete
fixed./ethd keys prepare-address-change
works with Prysm- Nethermind dashboard fixed
- SSV dashboard fixed
- Fixed the pre-provisioned high memory alert in Grafana
v2.6.0.0 2024-01-25
This is an optional release with new features and bug fixes
Breaking changes
- Requires Lighthouse 4.6.0 or later
New features
- Supports
./ethd prune-lighthouse
to prune Lighthouse state - Lighthouse VC will broadcast duties to all configured CLs, and uses v3 API for producing blocks
- Besu on machines with 64 GiB of RAM or more will use the high spec flag
- Added Bloxroute relay to default Holesky MEV config
- Prysm uses 70 max peers by default
./ethd config
offers a VC-only setup on Gnosis Chain. Thanks @haurog!- Remove Nethermind memory hints
- Add network aliases to CLs,
${NETWORK}-consensus
. This can be useful in setups with multiple Eth Docker installations on one host, all connected to the same Docker overlay network - Changed Prometheus yq dependency to version
4
- Update Lodestar beacon
max-old-space-size
to8192
. Thanks @nflaig! - Changed Teku default heap size to 5G
./ethd keys
does some input vaidation on public keys and other user-supplied values
Bug fixes
- Nethermind prune no longer outputs an error message on Nethermind 1.25.0 and later
- Added parameter to support Erigon 2.55 and later
v2.5.0.1 2023-12-31
This is an optional release with new features and bug fixes
- Breaking for Besu: Requires Besu 23.10.3
- Besu will limit its trie logs, and on fresh sync heal its flat DB for better RPC performance
- Besu source build uses Java 21 runtime (but continues to build with Java 17)
- Additional pre-previsioned Grafana alerts: memory, CPU, out of memory (OOM) kill
- Geth can keep its ancient directory on a separate path, see
ANCIENT_DIR
in.env
- Logs dashboard works if the directory is not called
eth-docker
- Nethermind auto-prune uses 350 GiB threshold again on Gnosis Chain
v2.4.1.0 2023-12-29
This is an optional release with new features and bug fixes
- Fix
./ethd keys import
with unique passwords. Thanks @shamoya! - Fix Teku archive sync on Holesky
- Nethermind auto-prune is network aware: Kicks off at 350 GiB mainnet, 50 GiB otherwise
- Web3signer PostgreSQL migration to PG16 during
./ethd update
- Teku source build uses Java 21
- Slightly less naive offline detection for
create-withdrawal-change.sh
v2.4.0.0 2023-12-13
This is an optional release with new features and bug fixes for most users
It is mandatory for users of Teku 23.12.0 who do not wish to use checkpoint sync
- Breaking change: Teku without checkpoint sync (e.g. archive node) uses parameters that require Teku 23.12.0
- Fixed checkpoint sync url query during
./ethd config
./ethd keys
can set individual Graffiti, as long as the client supports it- Prometheus instance hard-coded for easier use with dashboards that use instance
- Added a pre-provisioned Grafana alert for disk space
- Renamed Teku and Nimbus
-legacy.yml
files to-allin1.yml
v2.3.12.0 2023-12-04
This is an optional release with new features and bug fixes
- Fix Nimbus Web3signer wait loop
- Add
./ethd space
- Add Eden relays to Holesky during
./ethd config
mev-boost
can be source-built./ethd update
can be--non-interactive
- Support
ETHD_FRONTEND=noninteractive
as an alternative to--non-interactive
v2.3.11.0 2023-12-01
This is an optional release with new features and bug fixes
- New Nimbus and Teku deployments use a dedicated validator client service. Legacy deployments use the
nimbus-legacy.yml
andteku-legacy.yml
files - Introduced a wait loop to Nimbus when using Web3signer, to work around a bug in Nimbus
- Better handling of legacy
master
branch of Eth Docker
v2.3.10.0 2023-11-25
This is an optional release with new features and bug fixes
- Prometheus metrics collection improved. Scrape targets in
./prometheus/conf.d
, usesyq
to mergecustom-prom.yml
. Default scrape interval 15s instead of 1m now possible because of this, which solves a whole bevvy of "No Data" in preloaded dashboards. Thanks to @aliask! - Preserve empty
RAPID_SYNC_URL
in.env
- Extraneous web3signer messages during keyimport, when web3signer was not in use, resolved
./ethd up <service-name>
supported- Version numbering will be semver-ish from here: World-shaking changes (think Ethereum merge) first digit, breaking changes second digit, enhancements third digit, bug fixes fourth digit.
v2.3.9 2023-11-15
This is an optional release with new features and bug fixes
- Eth Docker's version can be pinned in
.env
- Use new Teku v23.11.0 syntax. Breaking for any prior version.
- Fix the
./ethd prune-geth
command - Additional IPv6 support for Lodestar, Geth and Erigon
- Use .NET 8 for Nethermind source build
default.env
defaults to Holesky testnet
v2.3.8 2023-11-08
This is an optional release with new features and bug fixes
- Fixed a breaking bug in
cl-traefik.yml
that impacted 2.3.7 - Fix
./ethd keys delete all
when using Web3signer ./ethd config
can now configure SSV for Holesky- Switched Prometheus to scrape by Docker labels
- Added Web3signer dashboard
- Fixed Nimbus dashboard provisioning
- Running multiple RPC nodes connected to one central traefik is now easier. If that is your use case, set
EL_NODE=http://${NETWORK}-execution:8551
in.env
. See theELCLIENT.yml
files for the alias this references.
v2.3.7 2023-11-02
This is an optional release with security relevant changes for traefik users
- BREAKING change for users who use traefik to access the execution client RPC API, consensus client REST
API or execution client engine RPC API: The
el-traefik.yml
,cl-traefik.yml
andel-traefik.yml
files are now required for this. This was done to avoid host header attacks against users who just want to expose Grafana and may not have firewall rules in place to trusted source IPs.
v2.3.6 2023-11-02
This is an optional release with new features and bug fixes
./ethd keys send-exit
works with RocketPool reverse hybrid- Raise Loki ingestion limit. Thanks invis!
- Prysm uses prysmctl for legacy exit method
- Erigon source build uses Go 1.21
./ethd config
offers Reth alpha- Send anonymized traefik usage
- Fixes to
prysm-vc-only.yml
. Thanks @nflaig! - Scraping metrics centrally is now supported
- RocketPool integration no longer adds
mev-boost.yml
- Error handler that restores
.env
if./ethd update
fails. Thanks invis! ./ethd config
is a little more visually consistent- On Ubuntu, use the
docker-compose-v2
package for Docker Compose upgrades - Lighthouse Siren fixed. Thanks @davidkassa!
- Changed default checkpoint URL for Gnosis Chain
- Added traefik labels to all
CL-CLIENT.yml
files
v2.3.5 2023-10-11
This is an optional release with new features and bug fixes
- Support for encrypted node key with an SSV node
- Remove hard coded ancient barriers for Nethermind, use Nethermind defaults
- Add tab completion for Linux systems. Thanks @jshufro!
- Add support for Lighthouse Siren
- Change Prometheus retention to 40d
- Configurable Lodestar heap
- Changed Teku and web3signer integration
- Add QUIC port to Lighthouse
- Support Nethermind v1.21
v2.3.4 2023-09-11
This is an optional release with new features and bug fixes
./ethd config
offers Holesky testnet- Geth fresh sync now uses PBSS
- SSV supports MEV
- SSV migrates to new jato-v2 testnet
- Reth supports full node pruning
- The
auto-prune.sh
script has been deprecated and will be removed with Dencun - New
./ethd keys sign-exit
command for use with clients' keymanager API ./ethd config
prompts for MEV when using a RocketPool reverse hybrid setup. Thanks @haurog!./ethd keys import
knows about eth2-val-tools stylekeys
andsecrets
folders. Thanks to Patches for prodding me!- Geth uses its down defaults for HTTP and WS API for easier override via
EL_EXTRAS
. Thanks @jiangbo0216! - Nimbus registers web3signer keys on startup
- All-new support for custom testnets. Set
NETWORK
to a github repo containing the network repo such ashttps://github.com/ethpandaops/dencun-testnet/tree/master/network-configs/devnet-8
. Thanks to Barnabas and client teams for the feature request! - Binary and source repos can now be specified in
.env
, to allow use of custom client repos for custom testnets. - Upgrading compose V1 to compose V2 no longer marks docker.io for deletion
- New Nethermind executable name on source build. Thanks @rubo!
v2.3.3 2023-08-15
This is an optional release with new features and bug fixes
- Fixed an
./ethd terminate
edge case that would attempt to delete volumes in other stacks / directories - Improved web3signer support; work around a Teku bug
- Support signing exit messages with keymanager API
- Teku default heap reduced to 4g
- Lodestar source build with node 20
- Lodestar doppelganger flag adjusted. Thanks @nflaig!
- cadvisor works on ARM64
- Default to jato-v2 for new SSV setups
- Geth source build with Go 1.21
v2.3.2 2023-08-03
This is an optional release with new features and bug fixes
- Update SSV and Nethermind dashboards
- Update Prysm dashboards
- Fix Teku VC connecting to Lighthouse CL
- Fix Nimbus VC using MEV Boost
- Remove dasel dependency from Nethermind
./ethd config
on Gnosis Chain now offers Lodestar- Teku default heap changed to
-Xmx6g
- Fix a docker presence check on macOS
- promtail can write to a remote Loki
- Loki uses TSDB
- Fix
./ethd install
failing when docker is not yet installed - Improvements to Geth and Lighthouse archive node options
- Reth binary images supported
- compose V1 EOS message
- Lodestar forces validator files open in case of lingering lock files
./ethd
can stop and restart individual services- Configurable traefik and ddns tags
- Lighthouse source build uses maxperf. Thanks @jimmygchen!
- Default NM source build target does not build rc targets. Thanks @nu404040!
- ethdo script fixed when user used a 25th word. Thanks @valefar-on-discord!
- Source builds updated to use Debian bookworm
v2.3.1 2023-05-17
This is an optional release with bug fixes
- Add web3signer support
- Update SSV and Nethermind dashboards
- IPv6 behind an
.env
var - Add logs dashboard. Thanks @gorillamania!
- Nethermind works on ARM64. Thanks @natpicone!
- New
prometheus-shared.yml
. Thanks @allen-pattern! - Fix
./ethd keys
when using RocketPool (reverse) hybrid
v2.3.0.1 2023-05-05
This is an optional release with bug fixes
- Support Nethermind 1.18 prune parameters; switch back to Hybrid prune
- Graffiti string with
&
character survives./ethd update
. ./ethd update
checks for source-built clients and starts a fresh build- Use
--nat
for Lodestar and Reth deposit-cli.yml
no longer causes error messages during./ethd update
.- Nethermind dasel dependency to
2.2.0
- Fix Lodestar and Nimbus entrypoint script on fresh sync
v2.3 2023-05-01
This is a recommended release
- Address findings from Sigma Prime security audit. Users of
ee-shared.yml
oree-traefik.yml
should pay particular attention. - Nethermind prune reduced to 2 threads, to have more headroom during sync committees.
v2.2.10.1 2023-04-29
This is an optional release
- validator exit for Lighthouse and Nimbus works if there are subdirectories in
.eth/validator_keys
. Thanks @gorillamania! - Add dashboard for Reth.
- traefik revamped, new v6-aware DDNS provider for
traefik-cf.yml
. - Lighthouse enables v6 by default.
v2.2.10 2023-04-23
This is a mandatory release for users of Erigon, and optional for all others
- Support Erigon v2.43.0.
- Initial work on IPv6 support.
- Fix infinite loop in
create-withdrawal-change.sh
. traefik-cf.yml
can use more granular token permissions.
v2.2.9.5 2023-04-16
This is an optional release
- Use
docker compose
if it anddocker-compose
are installed. - Nethermind memory hint higher for 64 GiB RAM.
create-withdrawal-change.sh
handles 12-word mnemonics.- Nimbus validator exit changed to fit new Nimbus behavior.
- New command
./ethd keys sign-exit from-keystore [--offline]
to create pre-signed exit messages.
v2.2.9.4 2023-04-13
This is an optional release with bug fixes
./ethd resync-consensus
fixed for Prysm and Lodestar. Thanks @FloatingUpstream!./ethd resync-consensus
can now wipe Teku and Nimbus DB safely, without touching keys.- Prysm uses the gcr.io docker image registry. Thanks @FloatingUpstream!
v2.2.9.3 2023-04-12
This is an optional release
- Nethermind uses Full pruning mode instead of Hybrid.
- Nethermind uses a lower memory hint to resolve OOM during prune.
- Nethermind archive mode fixed.
- Support for stake fish, staked.us and allnodes withdrawal change. Thanks @valefar!
v2.2.9.2 2023-04-09
This is an optional release with bug fixes
- Teku CL uses liveness tracking so doppelganger detection actually works.
- ethdo now works with reverse hybrid setups, and similar setups where the CL is remote.
- Undo a too-aggressive shell lint change, so saying "no" to Grafana works again.
- Adjust Nethermind prune threshold to account for it using MB not MiB.
- Adjust Nethermind memory hint in the hopes it won't OOM during prune.
- Withdrawal credential change readme clarification around the mnemonic that is needed.
v2.2.9.1 2023-04-03
This is an optional release with bug fixes
- Support Teku doppelganger detection.
./ethd keys send-address-change
counts unique addresses. Thanks to @valefar for fixing the logic!- Shell lint pass, which fixes a bug in
./ethd prune-nethermind
and./ethd install
.
v2.2.9 2023-04-01
This is an optional release
- Add automatic pruning to Nethermind, controlled by
AUTOPRUNE_NM
in.env
.
v2.2.8.7 2023-03-31
This is an optional release
- Remove soft max heap from Teku and Besu default JVM heap settings.
- Resolve failure when upgrading from eth-docker 2.2.8.3 or earlier.
- Dasel dependency upgraded to 2.1.2.
reth.yml
sets the P2P port.- Remove check for apparmor.
./ethd install
now requires Ubuntu 20.04 or later or Debian 10 or later../ethd
warns the user if they are using Compose V1.
v2.2.8.6 2023-03-26
This is a bugfix release
- Fix a bug introduced in 2.2.8.5 that would break Graffiti with spaces. Thanks @nflaig!
- New command
./ethd keys delete all
v2.2.8.5 2023-03-25
This is an optional release
- Support client default graffiti - use this for Lodestar incentive
- Add Lodestar beaconcha.in monitoring. Thanks @nflaig!
- Keymanager works on ARM64
- Rely on default ethdo timeout
- Require 250 GiB free for Nethermind prune
- Only overwrite
.env.bak
when there are changes - Warn user if
git pull
fails during./ethd update
v2.2.8.4 2023-03-21
This is a bugfix release
- Fix a bug during disk space check in
./ethd
introduced by 2.2.8.3
v2.2.8.3 2023-03-20
This is an optional release
./ethd resync-execution
and./ethd resync-consensus
commands added- origins for Geth ws set to
*
- thanks @0xDualCube - Query for mnemonic passphrase when generating change message
- Link to beaconcha.in broadcast tool
v2.2.8.2 2023-03-18
This is an optional release
./ethd
will check for free disk space and warn the user if it's running low- Fix and pin ethereum-metrics-exporter
- Default Graffiti uses 🦉
- Erigon supports larger return values for RocketPool >= 1.9
- Erigon and Prysm source builds use Go 1.20
- Lighthouse source build uses jemalloc and defaults to
stable
target - Prysm supports larger messages so credential change messages can be sent
- Initial web3signer addition - not integrated with any clients
- Don't query for mev-boost on Gnosis Chain
- Add auth port for Reth
v2.2.8.1 2023-02-19
This is an optional release
- Online/offline withdrawal change workflow now actually works 😅
- Geth will use PebbleDB on a fresh sync
- Zhejiang testnet supported with Lodestar and Nethermind
- Change default docker tag for Besu to
latest
- Remove legacy keyimport in preparation for security audit
v2.2.8 2023-02-08
This is an optional release
- Fixed
ethereum-metrics-exporter
. Thanks to @nflaig! - Added the ability to use client-default graffiti. Thanks to @nflaig!
./ethd install
places the user into thedocker
group on Debian- Support online/offline withdrawal address change with ethdo. See
./ethd keys
v2.2.7.1 2023-02-05
This is an optional release
- Nimbus engine connection defaults to
http://
instead ofws://
on a fresh install - Teku uses the
MINIMAL
mode when running pruned - Nethermind workaround for Prysm,
--JsonRpc.MaxBatchSize 10000
- New command
./ethd cmd run deposit-cli-change
to prep for withdrawal credential changes, if deposit-cli.yml is included and deposit-cli supports this - Flashbots URL change
- Check for apparmor on Ubuntu and Debian because of an issue with docker-ce 23.0.0
- Pre-provision homestaking dashboard id 17846. Thanks to @gwenvador!
v2.2.7 2023-01-20
This is an optional release
- New advanced option
ARCHIVE_NODE
in./env
. Caution that this can use upwards of 12TB of disk space. - Nethermind source build uses .NET 7.0
- Lodestar prometheus scrape fixed. Thanks @nflaig!
- Nethermind pruning requires 200 GiB free, down from 250 GiB
- Extremely experimental support for Reth - it does not yet sync
./ethd config
offers Erigon when running on Gnosis Chain- Update Nethermind's dasel dependency to v2.1.0
- All source builds can now build from a tag, a branch, or a PR
./ethd update
will also rundocker system prune --force
to remove dangling images and build caches
v2.2.6.3 2023-01-06
This is an optional release
- Update Ethereum metrics exporter dashboard to latest version
- Add ultrasound relays to default list - thanks @JustinDrake! 🦇🔊
- A few fixes for
./ethd
on macOS ./ethd config
builds only once 😅./ethd update
now defaults to keeping changed build targets, and can reset them to defaults with--refresh-targets
- New
./ethd keys create-prysm-wallet
for better UX when using Prysm - Remove return code workaround for Lodestar from key management script
v2.2.6.2 2022-12-31
This is an optional release
- Increase stop timeout for all EL to 5 minutes "just in case"
- Explicit permissions for all scripts in Dockerfile - thanks to @mLewisLogic for finding a corner case!
- Run Grafana as a non-root user
- Explicit NAT method added to Besu - thanks to @dabauxi!
- Update Nethermind's dasel dependency to v2.0.2
v2.2.6.1 2022-12-23
This is an optional release
- Add
--rpc-max-logs-range=65536
tobesu.yml
to support SSV and RocketPool out of the box - Fix handling of non-standard Docker data-root. Thanks to @mLewisLogic!
- Added
grafana-rootless.yml
for use with rootless docker.
v2.2.6 2022-12-22
This is a required release for users of Nimbus, and optional for all others
- Support Nimbus v22.12.0. This is a breaking change, no prior releases of Nimbus are supported.
./auto-prune.sh
now supports Nethermind. There is a risk that this breaks if Nethermind takes >24 hours to prune and the crontab is run every 24 hours. Feedback welcome../auto-prune.sh
now supports--threshold
and--help
- Pruning logic now recognizes a non-standard docker
data-root
directory - Host map additional P2P ports for Erigon: It uses a separate port for each eth/xx P2P protocol.
- Remove Nethermind metrics push timeout, as it no longer has a default pushgateway
- Fix an issue that had
./ethd update
build everything twice
v2.2.5.1 2022-12-15
This is a required release for users of Teku, and optional for all others
- Fix Teku keymanager API cert. Thanks to @alepacheco for raising the issue!
v2.2.5 2022-12-08
This is a required release for users of Erigon and Nethermind, and optional for all others
- Experimental support for Nimbus EL client,
nimbus-el.yml
- Remove
--metrics.expensive
from Erigon for 2.31.0 support - Be more deliberate about versions of dasel, alpine and traefik
v2.2.4.2 2022-12-02
This is an optional release containing new features and bug fixes
- Nethermind source build fixed. Thanks @nu404040!
- Reverted use of Bonsai snapshots. Note this can cause initial snap sync to fail, but should resolve failure after initial sync. Thanks @realsnick!
- Replace
which
withcommand -v
inethd
to get ready for Debian Bookworm - Add Nimbus as an option for Gnosis Chain during
./ethd config
- Image pull during
./ethd update
is more consistent
v2.2.4.1 2022-11-25
This is a required release for users of Nethermind on Gnosis, and optional for all others
- Let Nethermind determine sync mode based on chain
- Better Nethermind prune. Thanks to Joe at RocketPool for the suggestion!
- Some more cleanup around the removed Prometheus alert manager
- Remove Akula 😭
- Fix an error introduced by shell linting that caused
./ethd terminate
to fail - thanks to @RomanS-re!
v2.2.4 2022-11-22
This is a required release for users of Nethermind, and optional for all others
- Support Nethermind's new engine port parameters
./ethd attach-geth
command, thanks to @ldub!- Removed Prometheus alert manager - it had been broken since before merge, may as well remove it 😅. Use Grafana's built-in alert manager instead, please
- Sample config file for Grafana Cloud in
prometheus/custom-prom.yml.sample
- Require 250GiB free disk space before starting Nethermind prune
v2.2.3.1 2022-11-16
This is a required release for users of Akula, and optional for all others
- Fixed Akula source build
- Lint pass on all shell scripts
- Added deprecation warning to
./ethd keyimport
- Prometheus now uses default scrape time, so that
custom-prom.yml
will work withgrafana-cloud.yml
v2.2.3 2022-11-13
This is an optional release containing new features
- Work around Lodestar's non-standard return codes on recipient/gas keymanager API
- Keymanager API key import now waits up to 60s for slashing protection DB to be imported
- Support Nethermind health checks
- Use beaconcha.in's stat collector for Prysm and Nimbus
v2.2.2 2022-11-11
This is a required release for users of Erigon, and optional for all others
- Support Erigon 2.30.0's new
--externalcl
parameter. This is a breaking change, no prior versions of Erigon are supported. - Fix test for
custom-prom.yml
used ingrafana-cloud.yml
- Support MEV boost
-minbid
- Check for 125 GiB free disk space before Nethermind prune
- Dynamic wait time when re-starting Nethermind for prune
v2.2.1 2022-11-05
This is a required release for users of Erigon, and optional for all others
- Support Erigon 2.29.0's new log level parameter
- More debug info for sporadically failing Nethermind prune
v2.2.0 2022-11-02
This is a recommended release with new features and bug fixes
- Nethermind background pruning via
./ethd prune-nethermind
- Bonsai snapshots supported with Besu
- New
grafana-cloud.yml
that usesprometheus/custom-prom.yml
. Undocumented for now - Do not default to
--subscribe-all-subnets
forcl-only.yml
files. Please add this viaCL_EXTRAS
if you need it - Geth always runs an
apk update
first when building the local image - Fix provisioning of the prysm_less_10 dashboard. Thanks @FloatingUpstream!
- Support Teku's validator exit command for API managed keys
- Better UX for initial Blox SSV setup
- Add 30d retention period to Loki
- Moved
CL_EXTRAS
,EL_EXTRAS
andVC-EXTRAS
into entrypoint script slasher.yml
files removed. If you used these, please useCL_EXTRAS
instead- Enable pprof on Erigon and optimize for ZFS storage
- cadvisor does housekeeping every 30s
- Manifold removed from default relay list
- Nimbus VC offered during
./ethd config
v2.1.3 2022-10-06
This is an optional release with new features
- Erigon uses
stable
docker tag - Erigon uses
--batchSize 64m
in an attempt to squeeze it into 16 GiB 🐭 - Besu defaults to
latest-openjdk-latest
and uses soft heap 3g - Add Nimbus vc-only yml
- Erigon and Nimbus source builds default to latest release
- Remove all
OVERRIDE_TTD
mentions
v2.1.2 2022-10-04
This is an optional release with bug fixes
- Prometheus now survives restarts 😅
- Quiet Nethermind push failures
- Fix
ext-network.yml
version
v2.1.1 2022-10-02
This is an optional release with new features and bug fixes
- Added
BESU_HEAP
andTEKU_HEAP
variables to override the default Java heap settings for each - Fixed a bug in the new Prometheus yml handling for Nimbus and Teku
- Default Besu to 5g heap, up from 4g
- Source builds use Go 1.19
- Add new dependency for Lighthouse source build
v2.1.0 2022-09-29
This is an optional release with new features
./ethd install
now installs docker-ce./ethd config
offers existing values- EL clients no longer start as root - chown no longer needed post-merge
./ethd update
warns the user if there are uncommitted local changes
v2.0.4 2022-09-28
This is an optional release with new features
- Added a default dashboard for Nethermind
- Reworked yml processing for Prometheus targets
- Added cadvisor for Prometheus, and a dashboard for it
- Added ethereum-metrics-exporter for Prometheus, and a dashboard for it
- Added the ability to specify optional parameters for CL/EL/VC in
.env
v2.0.3 2022-09-25
This is an optional release with new features
- Added Lodestar metrics, and a dashboard for it
- Added
./ethd version
command. Thanks to @PabloCastellano! - Teku rapid sync works with checkpointz
- Renamed all
client-base.yml
files toclient.yml
- Lodestar supports validator exit again
v2.0.2 2022-09-16
This is a recommended release for post-merge changes
- Use current mev flag naming for Lighthouse VC
- Improved key import
- Fix Teku beacon stats API
- Teku can recover from unclean shutdown
- Add relay check to mev boost
- Lodestar mev boost and rapid sync fixed
- More resilient checkpoint sync for Nimbus and Lodestar
- Use sudo automatically as and if needed
- traefik metrics - thanks to @casualjim
- Teku counts deposits more slowly to interop better with Besu
- Teku -Xmx5g instead of -Xmx4g, to follow the team's recommendations
- Teku voluntary exit works with API-imported keys
- validator-backup command for Prysm
- Erigon metrics fixed, thanks @casualjim
MEV_NODE
andMEV_DOCKER_TAG
survive updates- Config wizard no longer asks for override TTD
v2.0.1 2022-08-24
This is a recommended release for the Ethereum Merge
- Support Lodestar v1.0.0
- Besu defaults to snap sync, after some issues with checkpoint sync
- Use new engine API syntax for Prsym
- Use fee recipient with Teku CL only
- Use current SSV v2 repo
- Fix Grafana for SSV v2
- Fix default dashboard for Nimbus
v2.0.0 2022-08-22
This is a mandatory release for the Ethereum Merge
- Breaking Change docker-compose v1.28.0 or later is required.
./ethd update
will prompt for it - Breaking Change Erigon needs to be resynced from scratch and will run on its
alpha
branch../ethd update
will prompt for it - Breaking Change Infura "web3" fallback for the Execution Layer connection is no longer supported
- Many changes to
.env
../ethd update
will make these automatically - merge-ready config with Engine API and JWT secret between Consensus Layer and Execution Layer
- Doppelganger Protection supported
- mev-boost supported
- New
./ethd install
command that attempts to install prerequisites on Ubuntu - Support Sepolia and Ropsten testnets, in addition to Goerli
- Ability to import slashing protection DB
- Better checks for prerequisites existing in
./ethd
. Thanks to joeytwiddle - Automatic
sudo
in./ethd
if required. Thanks to joeytwiddle - Keymanager support for Lodestar
- Besu defaults to checkpoint sync
- Teku VC supports failover CLs
v1.8.8 2022-07-13
This is an optional release, that contains new features and bug fixes
./ethd
now works with docker-ce and compose plugin, including on Debian 11- Support spaces in Graffiti
- Fix a regression in
./ethd prune-geth
v1.8.7 2022-06-25
This is an optional release, that contains new features and bug fixes
./ethd update
now always runs the latest version of itself./ethd update
aborts when a user chooses "Cancel" on the fee recipient screenFEE_RECIPIENT
variable in.env
instead ofREWARDS_TO
- Improve Lighthouse memory allocation defaults
- Gracefully handle
sudo ./ethd update
- Automatic switch to the
rpc-nodes
branch is clearer - Keep Teku key management API TLS cert from being deleted all the time
v1.8.6 2022-06-14
This is an optional release, that contains new features and bug fixes
./ethd prune-geth
now correctly asks for confirmation./ethd update
will nag users about running both a CL and EL. Nag screen can be overridden via.env
setting
v1.8.5 2022-06-11
This is an optional release, that contains new features and bug fixes
- Keep Lodestar build targets
- Suppress Nethermind JSON RPC logs
- Fix genesis download for Prysm on Prater
- Change SSV node default ports
- Hardcode
./.eth
as the directory for key files - Fix help URL displayed during
./ethd config
- Fix Lighthouse validator startup
- Rename Prater to Görli
- Stop tracking changes to
ext-network.yml
- Improve peer count adjustment, a MIN can now be set
- Change default Teku peers to 100
- Verify rewards address for correctness on
./ethd update
- Better UX / question flow during
./ethd config
- Clearer warning not to
./ethd restart
without a rewards address - Besu now defaults to snap sync
CL_NODE
will now inherit theCC_NODE
setting on./ethd update
v1.8.4 2022-05-24
This is an optional release, that contains new features and bug fixes
- Breaking change: OpenEthereum
oe.yml
has been removed, now that OpenEthereum is officially end of support and its repo has been archived - Fixed ethd to once more work on macOS
- Besu is now offered as a choice on ARM64
- All clients that support it now use
--suggested-fee-recipient
- Changed language of message box that prompts for fee recipient, to be clearer
- Added
validator-list
command
v1.8.3 2022-05-19
This is an optional release, that contains new features and bug fixes
- Highly, highly experimental support for Akula. Do not use in production
- A few fixes around CL/EL NewSpeak
- Lodestar can import multiple keystores non-interactively
- staking-deposit-cli moved to Python 3.10
./ethd update
prompts for an Ethereum rewards address for priority fees and MEV, to be used post-merge. Currently only and exclusively actually being used bylh-validator.yml
v1.8.2 2022-05-07
This is an optional update, that contains new features
- Experimental support for Prysm rapid sync
- Use JDK 17 to build Besu from source
- Remove consensus-only files and keep them in
rpc-nodes
branch only. Ditto remove old grafana yml files. This is meant to make the main branch more approachable.
v1.8.1 2022-04-26
This is an optional update, that contains new features
- Remove advanced yml files from
main
branch. Please use therpc-nodes
branch if you are running a distributed environment. ./ethd update
removes and renames yml files inCOMPOSE_FILE
and will automatically switch the branch for users of advanced yml files.
v1.8 2022-04-21
This is an optional update, that contains new features
- Close Promtail/Loki ports
- Support Gnosis Beacon Chain with
./ethd config
v1.7.8 2022-04-16
This is an optional update, that contains new features
- Prometheus metrics for all execution clients
- Remove node dashboard because it had Grafana alerts
- Update RocketPool integration for RocketPool 1.3.0
*-consensus.yml
now subscribe to all subnets, which is helpful for staking at scale- Add
prometheus-traefik.yml
for use with federation or just to make it available via https:// - Support Blox SSV 0.1.11 and later
v1.7.7.2 2022-03-28
- Switch to Go 1.18 for source builds
- Fix Nimbus Gnosis source build
v1.7.7.1 2022-03-22
- Lighthouse default peers 80 to fit new guidance
- Bonsai tries for Besu with GA flag - thanks to @JustNotHelpful
- Nimbus switched back to use ws:// for web3 connections
- Prysm source build no longer attempts to build standalone slasher
v1.7.7 2022-03-14
This is an optional update, that contains new features
- Breaking change: prysm-consensus-rest.yml removed, and prysm-consensus.yml changed to only support REST. Remote RPC is no longer available.
- Remove deprecated Nimbus RPC and use REST
- Improve Nimbus source build; support building Nimbus for Gnosis Chain
v1.7.6.1 2022-03-05
This is an optional update, that contains new features
- New
teku-stats.yml
to support beaconcha.in stats with Teku - Better
tzdata
installation on Debian images - Logs available in Grafana via Loki
v1.7.6 2022-02-16
This is an optional update, that contains new features and bugfixes
./ethd update
no longer overwrites an emptyGRAFFITI
- Support for Nimbus rapid sync
- Support for Nimbus CORS on keymanager (experimental)
- Switched default Nimbus web3 URL from ws:// to http://
v1.7.5.1 2022-02-09
This is an optional update, that contains new features
./ethd prune-geth
will now restart Geth after prune. Thanks to Joe @ RocketPool for the idea!- The
auto-prune.sh
script no longer asks for user input
v1.7.4.4 2022-02-08
This is an optional update, that contains new features and bug fixes
prysm-consensus.yml
now only exposes REST, no longer gRPC. This is a breaking change if you are using a remote Prysm validator with it!- Fixed Lodestar rapid sync to use the new format
- Fixed Lodestar execution client connection to use the new format
- Nethermind log level fixed
./ethd update
no longer shows an error when coming from an older version of eth-docker
v1.7.4.3 2022-02-05
This is an optional update, that contains new features
- Support staking-deposit-cli v2.0.0
v1.7.4.2 2022-02-04
This is an optional update, that contains new features
- Experimental support for the standardized key management API, exposed on localhost port
7500
withconsensus-keyapi-localport.yml
orvalidator-keyapi-localport.yml
, depending on whether the specific client has a separate validator container. - Warn when Ubuntu "snap" docker is found
- Default to Lighthouse
latest-modern
image - Nethermind no longer uses an ancient barrier. This means other clients can sync from it.
v1.7.4.1 2022-02-01
This is a bugfix update
- Grafana dashboards retain their variables across restart
./ethd config
and./ethd update
now warn when a snap install of Docker is found
v1.7.4 2022-01-30
This is an optional update, that contains new features
- Fixed Lodestar
- Initial support for integration with Wagyu installer
./ethd keyimport
command- Experimental support for Key Manager API on Nimbus, on
127.0.0.1:5053
v1.7.3 2022-01-29
This is an optional update, that contains new features
- MacOS support. Thanks to suburbandad!
- Nethermind no longer uses ancient barriers, so other clients can sync from it
- CORS origin * throughout so Metamask works
- geth-prune now wants 40GB free instead of 50GB
- Improved Besu source build
v1.7.2.5 2022-01-21
This is a bugfix update, and also contains new features
- Fix Lodestar validator startup path - yep that means no-one was running it :)
- Remove /etc/timezone throughout - the
-notz.yml
files should no longer be used on Amazon Linux 2 - Added Nethermind as an option on arm64
v1.7.2.4 2022-01-14
This is an optional update, that contains new features
- Support Nimbus validator monitor
- Improved
./ethd config
for RocketPool
v1.7.2.1 2022-01-14
This is an optional update, that contains new features
- Revamped
./ethd config
for easier integration with RocketPool and Blox
v1.7.1 2022-01-12
This is an optional update, that contains new features
- Added a Grafana dashboard for Besu.
v1.7.0 2022-01-11
This is an optional update, that contains new features
- Overhauled the Grafana dashboards. Please report issues.
v1.6.9 2022-01-10
This is an optional update, that contains new features
- Support running blox-ssv node via eth-docker
v1.6.8 2022-01-07
This is an optional update, that contains new features and bug fixes
- Traefik web proxy no longer uses wild card certs
- Nimbus no longer uses
--subscribe-all-subnets
when run as a consensus client only - Fixed a permissions issue with
./ethd prune-geth
v1.6.7 2022-01-02
This is an optional update, that contains new features and bug fixes
- Doppelganger protection turned off by default
- Lighthouse Rapid Sync now works with Grafana enabled
v1.6.5 2021-12-22
This is an optional update, that contains new features
./ethd config
now supports Lodestar- Source builds for Geth and Erigon switched to Go 1.17 from Go 1.16
v1.6.4 2021-12-17
This is an optional update, that contains new features
- Prep for Nimbus rapid sync
./ethd config
now queries for rapid sync on Lighthouse- Erigon supports
eth_sendRawTransaction
v1.6.3 2021-12-06
This is an optional update, that contains new features and bug fixes
- Fixed a bug in
lh-validator.yml
that would prevent the image building - Move LodeStar source build to node.js 16
- Support for LodeStar consensus client only and LodeStar validator client only
- Lodestar REST API also on port 5052
v1.6.2 2021-12-06
This is an optional update, that contains new features and bug fixes
- Fixed a permissions bug with
prysm-web.yml
introduced in 1.6 - Consensus REST API consistently on port 5052 for compatibility with RocketPool
v1.6.1 2021-11-27
This is an optional update, that contains new features
- Added
nimbus-consensus.yml
to run Nimbus as a remote consensus client - Changed
prysm-consensus.yml
to expose the standard REST API via https:// - Changed Nethermind source compile to use .NET 6.0
- Restricted Besu Java heap to 4 GiB
v1.6 2021-11-20
This is an optional update, that contains new features and bug fixes
- Support the latest Besu release
- All intermediary scripts that migrate from pre-v1.x setups have been removed. This is a breaking change if you are coming from a v0.x release.
-shared.yml
files for consensus clients, just for 0neInfra :)
v1.5.10 2021-11-10
This is an optional update, that contains new features and bug fixes
- Besu defaults to Bonsai tries. This will require a complete resync.
- Teku validator client uses
--network=auto
flag - Besu allows Metamask connection
- Added
./ethd rocketeer
to change RocketPool config when running hybrid mode - Auto-prune permissions issue resolved
./ethd update
keepsLS_RAPID_SYNC
v1.5.9 2021-10-11
This is an optional update, that contains new features
- New docker logging configuration - now when you run out of space, it'll be Geth, not Traefik debug logs
- Support for Lodestar's checkpoint sync via
LS_RAPID_SYNC
- Fixed Lodestar's binary and source builds: The location of the binary changed
v1.5.8 2021-10-09
This is a bugfix update
- beacon-chain stats work with the split consensus/validator Lighthouse. Thanks to Faisal Moledina.
v1.5.7 2021-10-09
This is a bugfix update
./ethd prune-geth
no longer tries to allocate a TTY, which could cause it to fail.
v1.5.6 2021-10-08
This is a bugfix update
lh-stats.yml
is now compatible withLH_RAPID_SYNC
.
v1.5.5 2021-10-06
This is a bugfix update
- Removed doppelganger protection from
lh-validator.yml
, because it does not play well with Teku/Infura
v1.5.4 2021-10-06
This is an optional update, that contains new features
- Support for Prym's new slasher and Lighthouse's slasher
- Optional
notz
files for Lighthouse and Teku, for use with Amazon Linux 2 or similar
v1.5.3 2021-10-01
This is an optional update, that contains new features
- Support for Lighthouse's new checkpoint sync. Requires LH v2.0.0
- Support for RocketPool and eth-docker side-by-side, using the consensus client and execution client in eth-docker for both
v1.5.2 2021-09-23
This is an optional update, that contains new features
- Erigon now uses
prune.r.before
for a PoS-friendly pruned DB. This is a breaking change for existing Erigon DBs, you'd need to resync ./ethd config
sets Geth and Erigon Grafana- Erigon available as a choice in
./ethd config
- New
--dry-run
flag forauto-prune.sh
- New
--keep-targets
flag for./ethd update
v1.5.1 2021-08-23
This is an optional update, that contains new features
- Enabled Lighthouse doppelganger protection by default
v1.5.0 2021-08-19
This is an optional update, that contains new features
- Breaking change The old
ETH1_*
andBN_*
variables have been removed. Please make sure your.env
no longer uses them../ethd update
will convert.env
for you. - Teku validator-only setup now works better with load-balanced consensus clients such as Infura
- Erigon now fully prunes, please see Client Setup documentation as to what that means for consensus client initial sync
- Initial support for ARM64 setups such as Mac M1, Raspberry Pi4, AWS t4g. This has not been extensively tested, feedback very welcome.
./auto-prune.sh
script that can be run in crontab and will prune Geth when disk space is below 100 GiB free or below 10% free. Requires thebc
package.
v1.4.2.4 2021-07-29
This is a bugfix update
- Work around a bug in Prysm that kept key import from working
- Added shared traefik as an advanced option
v1.4.2.3 2021-07-22
This is an optional update, that changes behavior
./ethd update
now migrates.env
first, then builds new client images. This means that people who change build targets will need to build again after running an update.
v1.4.2.2 2021-07-22
This is a bugfix update
- Fix
CC_HOST
not persisting on./ethd update
v1.4.2.1 2021-07-22
This is an optional update, that adds new features
- Support for the new Erigon
--prune
flag - Support for Erigon binary builds
- NB A future release of eth-docker will change the pruning defaults of the Erigon DB, which will require a resync from scratch of the DB.
v1.4.2 2021-07-21
This is an optional update, that adds new features
- Support the changed beaconcha.in stats API URL
v1.4.1.2 2021-07-21
This is a bugfix update
- Fixed Teku rapid sync when using grafana
- Teku now doesn't show initial error messages when using an Infura execution client
- Created "no timezone" options for teku files, for use with Amazon AMI
v1.4.1.1 2021-07-21
This is a bugfix update
- Fixed Teku validator-only on lowmem machines
v1.4.1 2021-07-20
This is an optional update, that contains new features
- Prysm doppelganger protection enabled by default
v1.4.0.1 2021-07-13
This is a bugfix update
- Fixed fallback execution client for Nimbus
v1.4.0 2021-07-13
This is an optional upgrade, that contains new features
- Added support for Lodestar consensus client
v1.3.3.2 2021-06-16
This is a bugfix update
- Fixed ec-traefik.yml
- Fixed Grafana to use the new consensus name, thanks crymo99!
- Teku can now run on machines with 8 GiB of RAM, with max heap 4G and soft max heap 2G.
v1.3.2 2021-06-10
This is an optional upgrade, that contains new features
- Added Grafana metrics for Erigon
- Grafana metrics for standalone Erigon/Geth via
blank-grafana.yml
v1.3.0 2021-06-09
This is an optional upgrade, that contains new features
sudo ./ethd prune-geth
simplifies pruning Geth- Separating consensus client and validator client is now supported for Teku, Lighthouse and Prysm. Please see the Secure Web Proxy instructions.
v1.2.5.2 2021-06-07
This is a bugfix upgrade
./ethd config
can correctly configure Teku Rapid Sync again
v1.2.5.1 2021-06-06
This is a bugfix upgrade
./ethd
help screen works againsudo ./ethd terminate
command introduced
v1.2.5 2021-06-05
This is an optional upgrade, that contains new features
- Erigon (still in alpha) now syncs a pruned DB
./ethd config
now queries the user for desired Graffitisudo ./ethd update
now does a root-safegit pull
to update eth-docker itself, and uses a different mechanism to redirect error messages fordocker-compose pull
, so it can update components likenode-exporter
with good UX.
v1.2.4 2021-06-05
This is a bugfix upgrade
./ethd update
no longer attempts todocker-compose pull
orgit pull
. In some instances the expected error messages fromdocker-compose pull
were not redirected to/dev/null
, and updating ancillary components while throwing a bevy of error messages is terrible UX.
v1.2.3 2021-06-04
This is an optional upgrade, that contains new features
./ethd update
now migrates.env
variables
v1.2.2 2021-06-03
This is an optional upgrade, that contains new features
- Initial support for erigon via
erigon.yml
. Source build only. - Support for sending stats to https://beaconcha.in from Prysm >= 1.3.10 via
prysm-stats.yml
. Source build only. - Support for sending stats to https://beaconcha.in from Lighthouse >= 1.4.0 via
lh-stats.yml
. Binary and source builds.
v1.2.1 2021-05-31
This is an optional upgrade, that contains new features
./ethd config
now supports setting a fallback execution client- Fixed an issue with
--folder
option when using deposit-cli
v1.2.0 2021-05-28
This is an optional upgrade, that contains new features
-
This release contains breaking changes to
.env
. Please recreate it fromdefault.env
, see above. -
All v1.x releases change the docker images used to run your node. Please be sure to
docker-compose build --pull
before (re)starting your node software. -
Renamed all eth1/beacon references to execution/consensus, to fit with the new naming conventions put forth by the Ethereum developers
-
Note this change will cause warning messages, as both
ETH1_
andEC_
variable names are supported. This backwards compatibility will be removed after "Altair", expected August 2021 -
Removed OpenEthereum from
./ethd config
as a choice. OpenEthereum will remain a supported execution client until Shanghai, to give users time to migrate.
v1.1.0 2021-05-12
This is an optional upgrade, that contains new features
-
This release contains breaking changes to
.env
. Please recreate it fromdefault.env
, see above. -
Validator-only option for Teku and Lighthouse!
-
Teku as the default choice in
default.env
, now that its out-of-the-box RAM use is < 5 GiB -
If you are using any version prior to v1.0.0 released 2021-05-06: PLEASE UPDATE BEFORE October 2021. The script that adjusts permissions for existing setups will be removed again at that point, and any setups that haven't updated by then would have permissions issues when they do update.
v1.0.0 2021-05-06
This is an optional upgrade, that contains bugfixes and new features
With funding from the Ethereum Foundation, we are at v1.0.0! This update makes significant changes to
the way permissions are handled. While this should improve your experience, please be aware that your .env
file
should likely be re-created with a fresh copy of default.env
, and your specific changes copied in. See above for
instructions.
LOCAL_UID
is no longer being used in.env
- Beacon and Ethereum node containers now run with a "high" user ID, not the user ID of the logged-in user. In order to make this seamless, they use a docker-entrypoint script that changes permissions of existing setups on the fly
- PLEASE UPDATE BEFORE October 2021. The entrypoint script will be removed again at that point, and any setups that haven't updated by then would have permissions issues when they do update.
- Prysm now runs on the Prater testnet without the need to manually pass in the genesis state
- Source builds for Nimbus, Prysm have been fixed; all source builds tested
docker-compose build --pull
is now much faster- deposit-cli has been removed from the
CLIENT-base.yml
files. If you do wish to use it, rather than generating keys offline, please adddeposit-cli.yml
toCOMPOSE_FILE
- deposit-cli services have been renamed to
deposit-cli-new
anddeposit-cli-existing
- The
validator-voluntary-exit
service has been renamed to justvalidator-exit
- Support for voluntary validator exit when using Teku
- Preliminary beta configuration script, run
./eth2d.sh
for a quick setup
v0.3.1 2021-04-22
This is an optional upgrade, that adds new features
- Added support for new Teku 21.4.1 features: eth1 failover endpoints, and rapid weak subjectivity sync from infura eth2 project
v0.3.0 2021-04-21
This is an optional upgrade, that adds new features
- Added Traefik reverse proxy for secure access to Grafana and Prysm Web, even eth1 clients. Note this is
a breaking change for existing Grafana, Prysm Web and shared/standalone eth1 clients. You will need to
add
grafana-insecure.yml
,prysm-web-insecure.yml
,eth1-insecure.yml
, depending on service you use, to yourCOMPOSE_FILE
inside.env
. Alternatively and recommended, addtraefik-cf.yml
ortraefik-aws.yml
and start using secure https:// ! Please see reverse proxy instructions. - Added wizard.sh shell script for quick initial setup
- Added node reporter Grafana dashboard to alert on low CPU, Memory or Disk Space
v0.2.7 2021-03-10
- Supports Prysm 1.3.3
- Changed default for Prysm peers to 45
default.env
no longer needsGETH1_NETWORK
thanks to Geth 1.10.x
v0.2.6.1 2021-02-08
- Nethermind pruning on by default
- Nimbus ENR IP auto-update on by default
v0.2.6 2021-01-26
- Added alert manager code. Thanks to @DarrenMa!
v0.2.5.4 2021-01-21
- Support for new Lighthouse Validator Monitor Grafana Dashboard
- Better Grafana port handling for use on cloud VPS with ufw
- OpenEthereum defaults to release tracking with the release of 3.1.1
v0.2.5.3 2021-01-18
- Changed Nimbus source build to use post-1.0.6 make target and binary names
- Support for simplified Web UI in Prysm 1.1.0. NB: prysm-web.yml no longer includes prysm-grafana.yml
v0.2.5.2 2021-01-14
- Added support for Nimbus voluntary exit
- Updated Teku source build to JDK15
- Changed Teku binary docker to new consensys/teku repository
- Changed default Nimbus source build target to
stable
v0.2.5.1 2021-01-09
- Changed sample-systemd to start services after containerd restart, which helps them survive Ubuntu auto-update
v0.2.5 2021-01-07
- Support for Nethermind 1.10.x-beta source builds
v0.2.4.2 2020-12-24
- Support for Lighthouse v1.0.5
v0.2.4.1 2020-12-16
- Support for Pyrsm fallback eth1 nodes
v0.2.4 2020-12-07
- Support for new metanull dashboard
- Initial support for ynager dashboard, eth price not working yet
v0.2.3.3 2020-12-06
- More time for OpenEthereum to shut down
- Added documentation on how to restrict access to Grafana when using a VPS
v0.2.3.2 2020-12-01
- Added max peer values to
default.env
. Make sure to transfer this fromdefault.env
to your.env
v0.2.3.1 2020-11-30
- Changed Geth shutdown to SIGINT with 2 min timeout so that Geth does not need to resync after
sudo docker-compose down
. In testing Geth took ~50s to shut down on my entry level server.
v0.2.3 2020-11-29
- First attempt at Geth Grafana metrics. Does not work for eth1-standalone currently
- Removed Nethermind manual barrier, as it is now part of Nethermind's default mainnet config
v0.2.2 2020-11-27
- Lighthouse v1.0.1 validator metrics supported
v0.2.1 2020-11-24
- Support for Besu eth1 client
- Fixed an issue with Nimbus log file
- Removed CORS settings for eth1, for now
- Tightened hosts values for Geth and Besu
v0.2.0 2020-11-24
- Support for Lighthouse v1.0.0
- Change default tags for Lighthouse and Prysm to track v1.0.0 release
v0.1.8.8 2020-11-20
- Initial attempt at Besu integration. While Besu builds, Lighthouse doesn't communicate with it. Strictly for testing.
v0.1.8.7 2020-11-19
- Integrated community dashboard for lighthouse, teku, and nimbus.
v0.1.8.6 2020-11-16
- Nethermind added as eth1 option, thanks to adrienlac. Not stable in testing.
- First attempt at binary option for all but eth2.0-deposit-cli
v0.1.8.5 2020-11-11
- Added option to run eth1 node exposed to the host on RPC port
v0.1.8.4 2020-11-08
- Updated grafana image to change all occurrences of
job="beacon"
tojob=beacon_node
in the metanull dashboard. - Updated grafana image to rename prysm dashboard titles.
v0.1.8.3 2020-11-07
- Auto configure Grafana with prometheus datasource.
- Auto Add
Metanull's Prysm Dashboard JSON
to Grafana - Auto Add
Prysm Dashboard JSON
to Grafana - Auto Add
Prysm Dashboard JSON for more than 10 validators
to Grafana
v0.1.8.2 2020-11-06
- Add OpenEthereum eth1 client option
v0.1.8.1 2020-11-05
- Experimental Prysm slasher - thank you @danb!
- Fixed Prysm Grafana which got broken when pulling out Prysm Web
v0.1.8 2020-11-04
- eth2.0-deposit-cli 1.0.0 for Ethereum 2.0 main net
- First stab at Lighthouse voluntary exit
- More conservative build targets for Lighthouse, Prysm, Teku, and Geth: Latest release tag instead of
master
v0.1.7.5 2020-10-29
- validator-import for Teku now understands Prysm export
v0.1.7.4 2020-10-29
- Support experimental Prysm Web UI
v0.1.7.3 2020-10-27
- Prysm change to remove creation of new protection DB, Prysm no longer has this flag
v0.1.7.2 2020-10-23
- Prysm changes to allow creation of new protection DB and remove experimental web support while it is in flux
v0.1.7.1 2020-10-16
- Prysm renamed
accounts-v2
toaccounts
, keeping pace with it
v0.1.7 2020-10-15
- Added "validator-voluntary-exit" to Prysm
- Default restart policy is now "unless-stopped" and can be changed via
.env
- Preliminary work to support Prysm Web UI, not yet functional
- Changed testnet parameter for Prysm to conform with alpha.29
- Use
--blst
with Prysm by default for faster sync speed - Handles Terms Of Service for Prysm, user is prompted during validator-import, and choice is remembered
- If you are upgrading this project and you are using Prysm, please run
sudo docker-compose run validator
and accept the terms of use. You can then Ctrl-C that process and start up normally again. This step is not necessary if you are starting from scratch.
v0.1.6 2020-10-09
- Support for Lighthouse v0.3.0, drop support for v0.2.x
- Please note that Lighthouse v0.3.x makes a breaking change to the beacon
db. You will need to sync again from scratch, after building the new v0.3.0
beacon image. You can force this with
sudo docker-compose down
,sudo docker volume rm eth2-docker_lhbeacon-data
(adjust to your directory path if you are not ineth2-docker
, seesudo docker volume ls
for a list). - Likewise, the location of the validator keystore has changed. The fastest way
to resolve this involves importing the keystore from scratch:
sudo docker volume rm eth2-docker_lhvalidator-data
(as before, adjust for your directory), and then import the keystore(s) again withsudo docker-compose run validator-import
. Your keystore(s) need to be in.eth2/validator_keys
inside the project directory for that. - When you have completed the above steps, bring up Lighthouse with
sudo docker-compose up -d eth2
and verify that the beacon started syncing and the validator found its public key(s) by observing logs:
sudo docker-compose logs -f beacon
andsudo docker-compose logs validator | head -30
, and if you wish to see ongoing validator logs,sudo docker-compose logs -f validator
. - The beacon will sync from scratch, which will take about half a day. Your validator will be marked offline for that duration.
- Please note that Lighthouse v0.3.x makes a breaking change to the beacon
db. You will need to sync again from scratch, after building the new v0.3.0
beacon image. You can force this with